Iptables don't block traffic
Hi all, this is my first message to the list, so excuse me if it is too trivial...
I have a Red Hat box running as a firewall in my network. It's
working fine, but now I'm doing tests in order to block certain Internet traffic. I've added the following rules which should drop packets from my PC to a known public IP (a web server):
iptables -A FORWARD -s 192.138.35.110 -d 193.110.128.200 -j DROP
But the packets are not droped because I still can connect to the
web server.
The default rule for FORWARD chain is DROP
Any ideas?
Thanks,
Oscar
Quoted 5 lines · Oscar Arranz
I have a Red Hat box running as a firewall in my network. It's
working fine, but now I'm doing tests in order to block certain Internet traffic. I've added the following rules which should drop packets from my PC to a known public IP (a web server):
Quoted 8 lines
iptables -A FORWARD -s 192.138.35.110 -d 193.110.128.200 -j DROP
But the packets are not droped because I still can connect to the
web server.The default rule for FORWARD chain is DROP
Any ideas?
You say you have added the above rule.
But, what have you added it *to*?
In other words, what other rules do you also have running on the machine?
That information would help us greatly in answering your question.
Regards,
Antony
Signature · 9 lines
Bill Gates has personally assured the Spanish Academy that he will never allow
the upside-down question mark to disappear from Microsoft word-processing
programs, which must be reassuring for millions of Spanish-speaking people,
though just a piddling afterthought as far as he's concerned.
- Lynne Truss, "Eats, Shoots and Leaves"
Please reply to the list;
please don't CC me.OK, I saw the problem. The default for FORWARD chain is another chain called block and its rules don't block this traffic.
Thanks for your interest.
Oscar
Antony Stone wrote:
On Thursday 22 April 2004 2:53 pm, Oscar Arranz wrote: I have a Red Hat box running as a firewall in my network. It's working fine, but now I'm doing tests in order to block certain Internet traffic. I've added the following rules which should drop packets from my PC to a known public IP (a web server): iptables -A FORWARD -s 192.138.35.110 -d 193.110.128.200 -j DROP But the packets are not droped because I still can connect to the web server. The default rule for FORWARD chain is DROP Any ideas?
Quoted 2 lines
OK, I saw the problem. The default for FORWARD chain is another chain called block and its rules don't block this traffic.
Well, ehm, not really.
The policy DROP for the chain means that all traffic that doesn't get ACCEPTed, REJECTed (or whatever) by one of your rules is DROPped.
Do you have another rule in the chain the ACCEPT's this traffic, before it reaches your DROP rule ?
Because then the packets are accepted before the ever reach the DROP chain.
Gr,
Rob
Quoted 1 line
Hi all, this is my first message to the list, so excuse me if it is
too
Quoted 11 lines
trivial...
I have a Red Hat box running as a firewall in my network. It's
working fine, but now I'm doing tests in order to block certain Internet traffic. I've added the following rules which should drop packets from my PC to a known public IP (a web server):iptables -A FORWARD -s 192.138.35.110 -d 193.110.128.200 -j DROP
But the packets are not droped because I still can connect to the
web server.
Look at your whole FORWARD chain: 'iptables -v -L FORWARD'. You have an earlier rule in the chain that's allowing those packets through.
If you want to be sure, try replacing '-A' by '-I'. This will insert your rule at the front of the FORWARD chain, instead of at the end.
Quoted 1 line
The default rule for FORWARD chain is DROP
This confirms it. If you didn't have an earlier rule that was letting the packets through, then with a DROP policy you wouldn't need the above rule at all.