Skip to contentSkip to conversation

nokia6600 <-> virtual serial port w/Bluez

Bluez-users Nikita Tovstoles 2 participants 2 messages Apr 25, 2004 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hi,

I'm trying to establish a virtual serial port connection between a linux box and nokia 6600. the connection will subsequently be used by a java app. residing on desktop and using javax.comm package. However, though i can create a connection using rfcomm, /dev/rfcomm0 is never recognized as a "serial port".

Here are the details:

before bluetooth:
-javax.comm sees the following ports on linux system:
/dev/ttyS0
/dev/lp0

My understanding is that if two devices advertise same service, they can use it. in this case, sdptool browse <phoneAdr> returns:
----
Service Name: Bluetooth Serial Port
...
Protocol descriptor list:
"L2CAP"
"RFCOMM"
Channel: 2

That means that Serial Port connection is only available on channel 2, right? however, when i try:
rfcomm connect /dev/rfcomm0 <phoneAddress> 2

i see "connected" on linux console, pin prompt on the phone, but as soon as i enter the pin, the host just disconnects. Why is that?

But, if i do not specify channel number, ie from linux console say:
rfcomm connect /dev/rfcomm0 <phoneAddress>

the connection is successfull and persistent. What exactly did i connect to? (ie which service? - sdptool says channel 1 on the phone is "dial-up networking"...)
However, if i use javax.comm package to list desktop's ports, i do not see /dev/rfcomm0 added to the list (see above). and if i specifically try to open that port using javax.comm package, i get NoSuchPort Exception.

So, how can i create a virtual serial port connection, and how can i verify it in linux (in unlikely case javax.comm is at fault here)?

thanks a lot

-nikita

-------------------------------------------------------
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek For a limited time only, get FREE Ground shipping on all orders of $35 or more. Hurry up and shop folks, this offer expires April 30th!
http://www.thinkgeek.com/freeshipping/?cpg=12297
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#1 lore raw

Hi Nikita,

Quoted 23 lines

I'm trying to establish a virtual serial port connection between a linux box and nokia 6600. the connection will subsequently be used by a java app. residing on desktop and using javax.comm package. However, though i can create a connection using rfcomm, /dev/rfcomm0 is never recognized as a "serial port".

Here are the details:

before bluetooth:
-javax.comm sees the following ports on linux system:
/dev/ttyS0
/dev/lp0

My understanding is that if two devices advertise same service, they can use it. in this case, sdptool browse <phoneAdr> returns:
----
Service Name: Bluetooth Serial Port
...
Protocol descriptor list:

    "L2CAP"
    "RFCOMM"
          Channel: 2
Quoted 8 lines

That means that Serial Port connection is only available on channel 2, right?
however, when i try:
rfcomm connect /dev/rfcomm0 <phoneAddress> 2

i see "connected" on linux console, pin prompt on the phone, but as soon as i enter the pin, the host just disconnects. Why is that?

this is may because this is the mRouter serial port. Check with hcidump if your phone tries to reconnect to you after cutting the connection.

Quoted 6 lines

But, if i do not specify channel number, ie from linux console say:
rfcomm connect /dev/rfcomm0 <phoneAddress>

the connection is successfull and persistent. What exactly did i connect to? (ie which service? - sdptool says channel 1 on the phone is "dial-up networking"...)

In most phones the serial port and the dial-up are the same.

Quoted 3 lines

However, if i use javax.comm package to list desktop's ports, i do not
see /dev/rfcomm0 added to the list (see above). and if i specifically try to open that port using javax.comm package, i get NoSuchPort Exception.

You should try using "rfcomm bind ..." and bind a specific /dev/rfcommX device to your phone. The connection is then established on demand.

Quoted 2 lines

So, how can i create a virtual serial port connection, and how can i verify it in linux (in unlikely case javax.comm is at fault here)?

If you have connected to your phone or bound /dev/rfcommX to it, you can use minicom and test some AT commands.

Regards

Marcel

-------------------------------------------------------
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek For a limited time only, get FREE Ground shipping on all orders of $35 or more. Hurry up and shop folks, this offer expires April 30th!
http://www.thinkgeek.com/freeshipping/?cpg=12297
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users