Skip to contentSkip to conversation

Adding module to ALSA tree with Kconfig script

DISCUSSION Perry Gilfillan 2 participants 2 messages Apr 26, 2004

lore
Share & tools
lore
#0 lore raw

Hello,

It seems that between alsa-driver-1.0.2 and 1.0.4, the scripts/Modules.dep file has been dropped in favour of Kconfig scripts.
This seems like a good thing, but I'm at a loss to get my snd-tvmixer
to work by this method.

I've looked at the revised "Writing an ALSA Driver" chapter 14, and still can't get it straight. The first hurdle is creating a Kconfig script in the alsa-kernel/i2c directory. This is what I came up with:

# ALSA I2C drivers

  menu "I2C devices"
          depends on SND!=n && I2C

config SND_TVMIXER
tristate "Video 4 Linux TV-Mixer"
depends on SND
help
Say 'Y' or 'M' to include support for TV-Mixer.
This module requires that the V4L msp3400 module be present.

endmenu

Then I have added these lines to alsa-kernel/i2c/Makefile:

snd-tvmixer-objs := tvmixer.o
obj-$(CONFIG_SND_TVMIXER) += snd-tvmixer.o

Chapter 14 has the second line written as 'extra-obj-$( ....', so I tried it both ways.

I'm building against a 2.4.25 kernel, so how do I invoke the Kconfig scripts? or do I need to RTFine kbuild Manual?

Thanks,

Perry
-----
Gilfillan Family: http://www.gilfillan.org/

Projects:
V3TV: http://www.gilfillan.org/v3tv/
VPX3224: http://www.gilfillan.org/vpx3224/
snd-tvmixer: http://www.gilfillan.org/ALSA/

-------------------------------------------------------
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek For a limited time only, get FREE Ground shipping on all orders of $35 or more. Hurry up and shop folks, this offer expires April 30th!
http://www.thinkgeek.com/freeshipping/?cpg=12297

#1 lore raw

At Mon, 26 Apr 2004 09:54:44 -0500,

Quoted 4 lines · Perry Gilfillan

I've looked at the revised "Writing an ALSA Driver" chapter 14, and still can't get it straight. The first hurdle is creating a Kconfig script in the alsa-kernel/i2c directory. This is what I came up with:

i2c directory is for the common i2c modules. this isn't the place to put the card driver. if it's a PCI card, put it under pci directory. or, if it's a generic driver, you can put it into drivers directory.

Quoted 2 lines

Chapter 14 has the second line written as 'extra-obj-$( ....', so I tried it both ways.

argh, it's a typo. obj-$(CONFIG_XXXX) is correct.

Quoted 2 lines

I'm building against a 2.4.25 kernel, so how do I invoke the Kconfig scripts?

ALSA configure script checks Kconfig and generates the proper configuration for older kernels, too. you don't need extra setting.

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek For a limited time only, get FREE Ground shipping on all orders of $35 or more. Hurry up and shop folks, this offer expires April 30th!
http://www.thinkgeek.com/freeshipping/?cpg=12297