cups (non)printing
I have a canon i80 printer equipped with a bluetooth receiver which prints properly under cups and a usb connection. I've compiled the cups-bluetooth package and transfered the 2 files manually to their appropriate locations. I edited the printer.conf file to put in the device address that I had determined from looking at the winxp configuration (where bluetooth does work). However, I can't get any response from trying to set the printer up in cups using the second method described in the install instructions. I am not sure where to look for it in the device list. I have a "zoom pccard" bluetooth device that flashes and is listed as running in the services. It seems to attach itself to ttyS4. I am running Mandrake 10.0 with the 2.6.3 kernel. Thanks for any help, Nelson Hogg
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Nelson,
Quoted 4 lines
I have a canon i80 printer equipped with a bluetooth receiver which prints properly under cups and a usb connection. I've compiled the cups-bluetooth package and transfered the 2 files manually to their appropriate locations. I edited the printer.conf file to put in the
Quoted 8 lines
device address that I had determined from looking at the winxp configuration (where bluetooth does work). However, I can't get any response from trying to set the printer up in cups using the second method described in the install instructions. I am not sure where to look for it in the device list. I have a "zoom pccard" bluetooth device that flashes and is listed as running in the services. It seems to attach itself to ttyS4. I am running Mandrake 10.0 with the 2.6.3 kernel. Thanks for any help, Nelson Hogg
actually I think the problem is to get your card running. What is the output of dump_cis? Do hciconfig shows a HCI device?
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann wrote: Hi Nelson, I have a canon i80 printer equipped with a bluetooth receiver which prints properly under cups and a usb connection. I've compiled the cups-bluetooth package and transfered the 2 files manually to their appropriate locations. I edited the printer.conf file to put in the device address that I had determined from looking at the winxp configuration (where bluetooth does work). However, I can't get any response from trying to set the printer up in cups using the second method described in the install instructions. I am not sure where to look for it in the device list. I have a "zoom pccard" bluetooth device that flashes and is listed as running in the services. It seems to attach itself to ttyS4. I am running Mandrake 10.0 with the 2.6.3 kernel. Thanks for any help, Nelson Hogg