syntax for advertising a service with specific uuid

Hi Nikita,

Quoted 7 lines

I'd like to create a client-server application in which a linux box (running bluez) will advertise a service by declaring a specific service uuid. the service needs to only be capable of sending / receiving strings so i'm assuming declaring a btspp service should be enough. that specific uuid will be embedded into a j2me midlet running on nokia 6600 (implementing jsr-82). the midlet will then search for service using url of format:

"btspp://1234567890123456789012" (uuid *has* to be chars long - nokia's apparent implementation limitation). so (correct me if i'm wrong )what i need is:
1.add Serial Port service via "sdptool add SP"
2.set attributeID 0x0003 (ServiceID) for the above Service Record to "1234567890123456789012"

Quoted 2 lines

correct?

I am not familiar with Symbian phones or JSR-82, so I can't help here.

Quoted 9 lines

i'm not sure of the sdptool syntax for step 2.

problem:
1.when i do step 1, i get "Serial Port registered". but, if i issue "sdptool get SP" afterwards, i get description of "SDP Server" (0x1000). shouldn't it return something like "SerialPort" (0x1101) - service class id for SerialPort per bt spec?
note: actually even if i issue "sdptool add LAN", subsequent "sdptool get LAN" returns same description as above.

I prefer you read the manpage of sdptool. The get command needs the record handle of the previous created record.

Quoted 7 lines

2. also, i couldn't figure out exact syntax to accomplish step 2 above (set attribute):
sdptool setattr --help returns

"usage: sdptool get rec_handle attrib_id attrib_value", which seems not to be what i need to do...

Again. Look at the manpage.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Quoted 12 lines · Marcel Holtmann

Quoted 10 lines

i'm not sure of the sdptool syntax for step 2.

problem:
1.when i do step 1, i get "Serial Port registered". but, if i issue "sdptool get SP" afterwards, i get description of
"SDP Server" (0x1000). shouldn't it return something like "SerialPort" (0x1101) - service class id for SerialPort per bt spec?
note: actually even if i issue "sdptool add LAN", subsequent "sdptool get LAN" returns same description as above.

Quoted 4 lines

I prefer you read the manpage of sdptool. The get command needs the record handle of the previous created record.

"man sdptool" returns nothing. the only thing i can look at is "sdptool --help". if that's not what you were referring to, where is sdptool's manpage?

%sdptool add --help
add [--channel] service
thanks