BT878 support.
Dear List/Clemens,
I have two Prolink PlayTV Pro capture cards (PV-BT878P+). One of them is revision 8E and tthe other is revision 9F.
I tried to use both of them with the snd-bt87x driver. Both of them returned only static.
I managed to get analog sound from the 8E with the btaudio (OSS) driver, but the 9F returned only silence.
What could be done to extend snd-bt87x support for both of them?
I can send any info I have on the boards and debug info. I can also test/compile any code if anyone is interested.
Thanks in advance for your attention,
Rodrigo Severo
-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3
Quoted 5 lines · Rodrigo Severo
I have two Prolink PlayTV Pro capture cards (PV-BT878P+). One of them is revision 8E and tthe other is revision 9F.
I tried to use both of them with the snd-bt87x driver. Both of them returned only static.
Probably different mixer settings?
Quoted 1 line
I managed to get analog sound from the 8E with the btaudio (OSS) driver,
Which version?
Regards,
Clemens
-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3
Quoted 6 lines · Clemens Ladisch
Quoted 3 lines · Rodrigo Severo
I have two Prolink PlayTV Pro capture cards (PV-BT878P+). One of them is revision 8E and tthe other is revision 9F.
Quoted 8 lines
Quoted 4 lines
I tried to use both of them with the snd-bt87x driver. Both of them returned only static.
Probably different mixer settings?
I tried all options. The bt87x mixer has just few options.
Quoted 9 lines
Quoted 5 lines
I managed to get analog sound from the 8E with the btaudio (OSS) driver,
Which version?
ALSA 1.0.4 and btaudio which came with kernel 2.4.25.
Do you need any extra info from the boards?
Rodrigo
--
----------------------------------------------------
Rodrigo Severo
Fábrica de Idéias
Fone: +55(61)321 1357
Fax: +55(61)223 1712
SBS - Quadra 2 - Ed. Empire Center - Sala 1301
Brasília/DF - Brasil
CEP: 70.070-904
----------------------------------------------------
-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3
Quoted 9 lines · Rodrigo Severo
Quoted 7 lines · Clemens Ladisch
Quoted 5 lines · Rodrigo Severo
I have two Prolink PlayTV Pro capture cards (PV-BT878P+). One of them is revision 8E and tthe other is revision 9F.
I tried to use both of them with the snd-bt87x driver. Both of them returned only static.
Did you try analog or digital or both?
Quoted 1 line
Quoted 1 line
Quoted 1 line
I managed to get analog sound from the 8E with the btaudio (OSS) driver,
Does digital work?
Quoted 3 lines
Quoted 2 lines
Which version?
ALSA 1.0.4 and btaudio which came with kernel 2.4.25.
In theory, btaudio and snd-bt87x should behave identically. What btaudio mixer settings and input do you use when it works?
Regards,
Clemens
-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3
Quoted 15 lines · Clemens Ladisch
Quoted 11 lines · Rodrigo Severo
Quoted 7 lines · Clemens Ladisch
Quoted 3 lines · Rodrigo Severo
I have two Prolink PlayTV Pro capture cards (PV-BT878P+). One of them is revision 8E and tthe other is revision 9F.
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
I tried to use both of them with the snd-bt87x driver. Both of them returned only static.
Did you try analog or digital or both?
Both.
Quoted 9 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
I managed to get analog sound from the 8E with the btaudio (OSS) driver,
Does digital work?
No. I get only silence from the digital device.
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Which version?
Quoted 7 lines
Quoted 3 lines
ALSA 1.0.4 and btaudio which came with kernel 2.4.25.
In theory, btaudio and snd-bt87x should behave identically.
I thought so.
Quoted 3 lines
What btaudio mixer settings and input do you use when it works?
The default setting, i.e. the ones set when the driver is modprobed, work just fine.
Yesterday I was doing some extra tests. With aumixer I get three connections under btaudio: Line[1-3].
The audio capture works just the same no matter which device I set as the record device. The volume control affects the recording though (I have to leave the volume level really low not to get any noticeable distortion).
BTW, I have tested two other boards: a very old board autodetected by bttv as "(Askey Magic/others) TView99 CPH05 x [card=24], PCI subsystem ID is 144f:3002" and another Prolink PlayTV Pro, this time revision 9D.
With the Askey Magic I got only silence but with the Prolink PlayTV Pro revision 9D I got bad sound with btaudio. By bad I mean a slightly high pitch soundI got the sound of the TV with a slightly higher pitch than usual and with more than usual noise during silence. The sound was bad but at least I got something.
Today I found another BT878 board for sell here in Brasilia: Pinnacle PCTV. I could have tested it also but I got lazy. The store I found all these boards are a little distant from my work and I have already tested 5 different boards.
Do you think there is any chance for these boards to work with btaudio and/or snd-bt87x?
BTW, is there some kind of list with boards that work with btaudio and/or snd-bt87x?
Thanks again for your attention,
Rodrigo Severo
--
----------------------------------------------------
Rodrigo Severo
Fábrica de Idéias
Fone: +55(61)321 1357
Fax: +55(61)223 1712
SBS - Quadra 2 - Ed. Empire Center - Sala 1301
Brasília/DF - Brasil
CEP: 70.070-904
----------------------------------------------------
-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3
Quoted 8 lines · Rodrigo Severo
With the Askey Magic I got only silence but with the Prolink PlayTV Pro revision 9D I got bad sound with btaudio. By bad I mean a slightly high pitch soundI got the sound of the TV with a slightly higher pitch than usual and with more than usual noise during silence. The sound was bad but at least I got something.
Do you think there is any chance for these boards to work with btaudio and/or snd-bt87x?
The driver supports the functionality that is implemented by the BT878 chip. If a card has some extra hardware for amplifying/routing/etc. that needs to be configured, the driver doesn't know about this.
It would be possible to add this hardware-specific support if there would be some documentation about it.
Quoted 2 lines
BTW, is there some kind of list with boards that work with btaudio and/or snd-bt87x?
My Hauppauge WinTV works. It seems most other cards have added features that must be configured explicitly.
Regards,
Clemens
-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click