Skip to contentSkip to conversation

HTB_Multiple_Interface_Query

LARTC Raghuveer K 1 participant 1 message May 20, 2004

lore
Share & tools
lore
#0 lore raw

Hi Stef,

I want to use HTB for shaping outgoing traffic. I have 2 interfaces with eth0 as my WAN and eth1 as LAN. I want to use HTB at eth0 as well as at eth1 for outgoing traffic control. Iam using 2.4.18 kernel, I would like to confirm following things:-
1. What patch/tar I have to use to have HTB support.
2. Applying HTB on eth0(wan) and eth1(lan) for outgoing traffic control, will it work fine ..?. My understanding by outgoing traffic for eth0(wan interface) is traffic going out to Internet and for eth1(lan interface) is traffic going out to LAN m/c's.

Regards
-Raghuveer

Signature · 11 lines
****** This email is confidential and is intended for the original recipient(s)
only. If you have erroneously received this mail, please delete it immediately
and notify the sender. Unauthorized copying, disclosure or distribution of the
material in this mail is prohibited. Views expressed in this mail are those of
the individual sender and do not bind Gsec1 Limited. or its subsidiary, unless
the sender has done so expressly with due authority of Gsec1.******
 

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/