need for stateful packet inspection
I am ignorant re iptables.
I am considering buying a linksys router. It seems to have statefull packet inspection that blocks nonmatching incoming packets.
If I do not have a server exposed to the internet, do I need any
packet inspection other than checking that all incoming packets match an earlier outgoing request?
TIA
rfjones
Quoted 11 lines · Randolph Jones
I am ignorant re iptables.
I am considering buying a linksys router. It seems to have statefull packet inspection that blocks nonmatching incoming packets.
If I do not have a server exposed to the internet, do I need any packet inspection other than checking that all incoming packets match an earlier outgoing request?
TIA
rfjones
In short, no. If your needs are minimal and you do not need to managed multiple devices a linksys may be fine for you. I cannot speak to the quality of Linksys; I have not used them. However, not all stateful inspection engines are created equal. Consider what functionality you may need in the future. Consider how important reliability is, i.e., if the device occasionally fails and needs to be reset, is that a problem. However, for very simple needs, a Linksys will probably be fine.
Does anyone else have any thoughts, comments or insults?
Signature · 9 lines
John A. Sullivan III Chief Technology Officer Nexus Management +1 207-985-7880 [email protected] --- If you are interested in helping to develop a GPL enterprise class VPN/Firewall/Security device management console, please visit http://iscs.sourceforge.net
Quoted 3 lines · Randolph Jones
I am considering buying a linksys router. It seems to have statefull packet inspection that blocks nonmatching incoming packets.
Stateful inspection is implemented on a per application basis, so support for SI may mean that FTP gets inspected but not Telnet, DNS, etc., etc.
Stateful packet filtering is implemented on a per transport basis, so TCP and UDP may be handled but not ICMP, GRE, AH, etc., etc.
So you need to look a bit more closely at the device beyond whether it supports SI or not. You have to see where it has been implemented.
Quoted 3 lines
If I do not have a server exposed to the internet, do I need any packet inspection other than checking that all incoming packets match an earlier outgoing request?
And the answer is.... "it depends". ;-)
FTP tends to "break" if you are not inspecting the payload and looking for the port negotiations. Many devices get around this by only supporting passive mode, but that requires you to open up all upper ports. This is a great way to ensure that call home Trojans can get out as well. Same is true for other complex protocols such as DCOM, Real Audio, etc. etc.
Also, you need SI to handle ICMP errors correctly. Type 3's and type 11's seem to be the covert channel of choice these days as many firewalls let them blow right though.
So if the Linksys supports all of the above, you are cool. If it does not but you don't care about any of the above, you are cool as well. Otherwise, you may want to look into getting something more robust.
I have no idea what the Linksys looks like these days. I know a few years back it was trivial to use loose source route to communicate with hosts on the protected side of the device. You may want to test this.
HTH,
Chris