Skip to contentSkip to conversation

Programming the unknow P16v chip on the Audigy2

DISCUSSION James Courtier-Dutton 2 participants 2 messages May 28, 2004 – Jun 1, 2004

lore
Share & tools
lore
#0 lore raw

The Audigy2 has lots of registers for the emu10k2 chip. These are accessed by programming

#define PTR 0x00  /* Indexed register set pointer register        */
                  /* NOTE: The CHANNELNUM and ADDRESS words can   */
                  /* be modified independently of each other.     */
#define DATA 0x04 /* Indexed register set data register           */

Basically, one writes the register address to PTR, and then read or write to DATA.

On the Audigy2 there is a similar setup for 0x20 and 0x24. I suspect that this is used to program the p16v chip.

Had anyone looked into those registers, and tried to guess what they do ?

I might give it a go, once I finish the Audigy LS driver.

Cheers
James

-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click

#1 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 5 lines · James Courtier-Dutton

Basically, one writes the register address to PTR, and then read or write to DATA.

On the Audigy2 there is a similar setup for 0x20 and 0x24. I suspect that this is used to program the p16v chip.

I guess that is correct.

Quoted 1 line

Had anyone looked into those registers, and tried to guess what they do ?

With virtually no information this would be difficult. It seems like that playback over the P16V would be an easier goal than getting the inputs to work, but I have no idea how to make a PCM extension for the P16V. The routing diagram shown on the kX webpage indicates that there should be direct playback not using the 10k2 at all. They have made a special effects module which allows input coming through the P16V to be routed into the 10k2, but normally there doesn't seem to be a connection.

Thomas

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFAvOPkErlRqeo9RVURAtmxAJ4tgZDpge2ccMwlbXiwuEuTMewzvQCfdYJo cg5An6CWYX9ari21NEVgGug=
=+WsE
-----END PGP SIGNATURE-----

-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.

Quoted 1 line

From Windows to Linux, servers to mobile, InstallShield X is the one

installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504