bk-drm patch missing from 2.6.6-mm2 and later?
Hi,
2.6.6-mm1 has it, 2.6.6-mm2 and later does not and announce.txt from 2.6.6-mm2 does not say anything about why it has been dropped. 2.6.7-rc1 does not seem to have it either. Would you please include it again or at least say something about it...
Best regards,
Zoltán Böszörményi
Zoltan Boszormenyi írta:
Quoted 9 lines
Hi,
2.6.6-mm1 has it, 2.6.6-mm2 and later does not and announce.txt from 2.6.6-mm2 does not say anything about why it has been dropped. 2.6.7-rc1 does not seem to have it either. Would you please include it again or at least say something about it...
Quoted 3 lines
Best regards,
Zoltán Böszörményi
Sorry, I searched for "dri" instead of "drm".
2.6.7-rc1 has the patch.
Quoted 11 lines · Zoltan Boszormenyi
Zoltan Boszormenyi írta:
Quoted 9 lines
Hi,
2.6.6-mm1 has it, 2.6.6-mm2 and later does not and announce.txt from 2.6.6-mm2 does not say anything about why it has been dropped. 2.6.7-rc1 does not seem to have it either. Would you please include it again or at least say something about it...
Quoted 6 lines
Quoted 3 lines
Best regards,
Zoltán BöszörményiSorry, I searched for "dri" instead of "drm".
2.6.7-rc1 has the patch.
Yes, but it's empty. Dave, is the latest DRM devel tree
at http://drm.bkbits.net/drm-2.6?
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
Sorry, I searched for "dri" instead of "drm".
2.6.7-rc1 has the patch.Yes, but it's empty. Dave, is the latest DRM devel tree
at http://drm.bkbits.net/drm-2.6?
its defo in 2.6.7-rc1 I've seen the changes in Linus bk tree, the latest tree is still at that address, but I'm not changing it much until 2.6.7 is out....
Dave.
Signature · 3 lines
David Airlie, Software Engineer http://www.skynet.ie/~airlied / airlied at skynet.ie pam_smb / Linux DECstation / Linux VAX / ILUG person
Andrew Morton írta:
Quoted 13 lines
Quoted 11 lines · Zoltan Boszormenyi
Zoltan Boszormenyi írta:
Quoted 9 lines
Hi,
2.6.6-mm1 has it, 2.6.6-mm2 and later does not and announce.txt from 2.6.6-mm2 does not say anything about why it has been dropped. 2.6.7-rc1 does not seem to have it either. Would you please include it again or at least say something about it...
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
Best regards,
Zoltán BöszörményiSorry, I searched for "dri" instead of "drm".
2.6.7-rc1 has the patch.
^ not 2.6.7-rc1-mm1, plain 2.6.7-rc1
Quoted 2 lines
Yes, but it's empty. Dave, is the latest DRM devel tree
at http://drm.bkbits.net/drm-2.6?
Empty?
http://www.kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.7-rc1.bz2
has patches to drivers/char/drm/* that look exactly like the bk-drm.patch from 2.6.6-mm1. And more, like ati_pcigart.h and others that weren't in 2.6.6-mm1 so that seems newer.
But http://linus.bkbits.net:8080/linux-2.5/ChangeSet@-3w?nav=index.html
does not seem to list it.
http://www.kernel.org/pub/linux/kernel/v2.6/testing/ChangeLog-2.6.7-rc1
has these (I may not have cut&pated every one of them):
<[email protected]>
- Converted Linux drivers to initialize DRM instances based on
PCI IDs, not
just a single instance. The PCI ID lists include a driver
private field, which may be used
by drivers for chip family or other information. Based on work
by jonsmirl
and Eric Anholt. I've left out the PCI device naming for this
patch as
that might be a bit controversial. clean up tdfx to look like
everyone else..
<[email protected]>
From: Eric Anholt:
- Move IRQ functions from drm_dma.h to new drm_irq.h and
disentangle them from
__HAVE_DMA. This will be useful for adding vblank sync support
to sis and
tdfx. Rename dma_service to irq_handler, which is more
accurately what it is.
- Fix the #if _HAVE_DMA_IRQ in radeon, r128, mga, i810, i830,
gamma to have
the right number of underscores. This may have been a problem
in the case
that the server died without doing its DRM_IOCTL_CONTROL to uninit
<[email protected]>
left gamma_dma.c out of last changeset
<[email protected]>
- Add DRM_GET_PRIV_WITH_RETURN macro. This can be used in
shared code to get
the drm_file_t * based on the filp passed in ioctl handlers.
<[email protected]>
From Eric Anholt:
Introduce a new ioctl, DRM_IOCTL_SET_VERSION. This ioctl
allows the server
or client to notify the DRM that it expects a certain version
of the device
dependent or device independent interface. If the major doesn't
match or minor
is too large, EINVAL is returned. A major of -1 means that the
requestor
doesn't care about that portion of the interface. The ioctl
returns the actual
versions in the same struct.
<[email protected]>
From: Michel Daenzer:
Memory layout transition:
* the 2D driver initializes MC_FB_LOCATION and related
registers sanely
* the DRM deduces the layout from these registers
* clients use the new SETPARAM ioctl to tell the DRM where they
think the
framebuffer is located in the card's address space
* the DRM uses all this information to check client state and
fix it up if
necessary
This is a prerequisite for things like direct rendering with
IGP chips and
video capturing.
<[email protected]>
From Eric Anholt: some cleanups from AlanH:
- Tie the DRM to a specific device: setunique no longer
succeeds when given
a busid that doesn't correspond to the device the DRM is
attached to. This
is a breaking of backwards-compatibility only for the
multiple-DRI-head case
with X Servers that don't use interface 1.1.
- Move irq_busid to drm_irq.h and make it only return the IRQ
for the current
device. Retains compatibility with previous X Servers, cleans
up unnecessary
code. This means no irq_busid on !__HAVE_IRQ, but can be changed if necessary.
- Bump interface version to 1.2. This version when set
signifies that the
control ioctl should ignore the irq number passed in and enable the interrupt handler for the attached device. Otherwise it errors
out when
the passed-in irq is not equal to the device's.
- Store the highest version the interface has been set to in
the device.
<[email protected]>
From Eric Anholt:
Return EBUSY when attempting to addmap a DRM_SHM area with a
lock in it if
dev->lock.hw_lock is already set. This fixes the case of two X
Servers running
on the same head on different VTs with interface 1.1, by making
the 2nd head
fail to inizialize like before.
<[email protected]>
From Eric Anholt + Jon Smirl:
Don't ioremap the framebuffer area. The ioremapped area wasn't
used by
anything.
<[email protected]>
From Michel Daenzer:
Adapt to nopage() prototype change in Linux 2.6.1.
Reviewed by: Arjan van de Ven <[email protected]>, additional
feedback
from William Lee Irwin III and Linus Torvalds.
<[email protected]>
More differentiated error codes for DRM(agp_acquire)
<[email protected]>
drm_ctx_dtor.patch
Submitted by: Erdi Chen
<[email protected]>
Miscellaneous changes from DRM CVS
<[email protected]>
radeon_drm.h:
missing define from previous checkin
<[email protected]>
* Introduce COMMIT_RING() as in radeon DRM, stop using error prone writeback for ring read pointer (Paul Mackerras)
* Get rid of some superfluous stuff, minor fixes
<[email protected]>
From Jon Smirl:
This code allows the mesa drivers to use a single definition of
the DRM sarea/IOCTLS
Best regards,
Zoltán Böszörményi