Skip to contentSkip to conversation

Delete cris architecture?

DISCUSSION Dan Kegel 4 participants 4 messages May 31, 2004

lore
Share & tools
lore

Dan Kegel

author
#0 lore raw

on linux-2.6.6, 'make oldconfig' fails on cris with

scripts/kconfig/conf -o arch/cris/Kconfig arch/cris/Kconfig:158: can't open file "arch/cris/drivers/Kconfig" make[1]: *** [oldconfig] Error 1

This was reported about a year ago on 2.6.0-test2:
http://mhonarc.axis.se/dev-etrax/msg03456.html
but it seems nothing has been done about it.

Since step 1 of building a linux kernel for cris seems to have been dead in the water for almost a year with no action from the port's maintainer, perhaps the port should be deleted from the main kernel tree.

Or perhaps the maintainer could submit a fix. His choice :-)
- Dan

Signature · 2 lines
My technical stuff: http://kegel.com
My politics: see http://www.misleader.org for examples of why I'm for regime change
#1 lore raw
Quoted 6 lines · Dan Kegel

on linux-2.6.6, 'make oldconfig' fails on cris with

scripts/kconfig/conf -o arch/cris/Kconfig arch/cris/Kconfig:158: can't open file "arch/cris/drivers/Kconfig" make[1]: *** [oldconfig] Error 1

Quoted 8 lines

This was reported about a year ago on 2.6.0-test2:
http://mhonarc.axis.se/dev-etrax/msg03456.html
but it seems nothing has been done about it.

Since step 1 of building a linux kernel for cris seems to have been dead in the water for almost a year with no action from the port's maintainer, perhaps the port should be deleted from the main kernel tree.

If you delete it, there's less chance of someone picking it up as the new maintainer. It will kill an obvious starting point for someone wanting to continue the work on it.

Signature · 4 lines
Debian     - http://www.debian.org/
Linux 1394 - http://www.linux1394.org/
Subversion - http://subversion.tigris.org/
WatchGuard - http://www.watchguard.com/
#2 lore raw
In reply to Dan Kegel

The CRIS architecture is stable and supported by Axis Communications officially in 2.4, but the 2.6 port is work-in-progress, thus you could expect problems building it from the vanilla kernel source. It works in-house on 2.6, but perhaps all patches have not trickled out to the official kernel yet (although they should have I think, so it's good that you mention stuff like this).

In the meantime, I would recommend using 2.4 if you want to compile a CRIS kernel.

Regards

Bjorn W

Quoted 19 lines · Dan Kegel

on linux-2.6.6, 'make oldconfig' fails on cris with

scripts/kconfig/conf -o arch/cris/Kconfig arch/cris/Kconfig:158: can't open file "arch/cris/drivers/Kconfig" make[1]: *** [oldconfig] Error 1

This was reported about a year ago on 2.6.0-test2:
http://mhonarc.axis.se/dev-etrax/msg03456.html
but it seems nothing has been done about it.

Since step 1 of building a linux kernel for cris seems to have been dead in the water for almost a year with no action from the port's maintainer, perhaps the port should be deleted from the main kernel tree.

Or perhaps the maintainer could submit a fix. His choice :-)
- Dan

#3 lore raw
Quoted 6 lines · Bjorn Wesen

The CRIS architecture is stable and supported by Axis Communications officially in 2.4, but the 2.6 port is work-in-progress, thus you could expect problems building it from the vanilla kernel source. It works in-house on 2.6, but perhaps all patches have not trickled out to the official kernel yet (although they should have I think, so it's good that you mention stuff like this).

When grepping the source and even doing cross architecture changes it is nice to have a ratehr up-to-date version in the main stream kernel.

It would be nice if Axis could at least drop an update of the tree for each kernel release (provided there are any changes).
This would allow all of us to get a better overview, and in some cases we may even introduce new stuff / fix errors.

So please start to feed Andrew (or Linus) regularly with updates.

Sam