Skip to contentSkip to conversation

Real time clock on ia64 platforms

DISCUSSION Christian Hildner 6 participants 12 messages Jun 1, 2004 – Jun 2, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

someone may know what kind of RTC device the ia64 platforms (HP ZX 6000
+ i2000) use. I want to access it directly, without using EFI calls.

Christian

#1 lore raw
Quoted 2 lines · Christian Hildner

someone may know what kind of RTC device the ia64 platforms (HP ZX 6000
+ i2000) use. I want to access it directly, without using EFI calls.

It's probably different on each of them. Why do you want to access it without going through firmware?

Signature · 6 lines
"Next the statesmen will invent cheap lies, putting the blame upon 
the nation that is attacked, and every man will be glad of those
conscience-soothing falsities, and will diligently study them, and refuse
to examine any refutations of them; and thus he will by and by convince 
himself that the war is just, and will thank God for the better sleep 
he enjoys after this process of grotesque self-deception." -- Mark Twain
#2 lore raw
In reply to Christian Hildner
Quoted 4 lines · Christian Hildner

Hi,

someone may know what kind of RTC device the ia64 platforms (HP ZX 6000
+ i2000) use. I want to access it directly, without using EFI calls.

This is strongly not recommended. On HP chipset boxes, the devices
are only designed to be accessed via the EFI calls (and yes, EFI firmware can and does work around bugs in the RTC). There's also no architected way to find the real RTC in the address map. Why do you need to poke it directly?

Alex

#3 lore raw
In reply to Christian Hildner

The portable way to access the RTC is either gettimeofday()
or clock_gettime(CLOCK_REALTIME). The gettimeofday caall is a fast system call on many ia64 platforms and does not use EFI calls. EFI calls are only used on bootup to determine the current RTC clock and the clock characteristics.

Quoted 19 lines · Alex Williamson
Quoted 4 lines · Christian Hildner

Hi,

someone may know what kind of RTC device the ia64 platforms (HP ZX 6000
+ i2000) use. I want to access it directly, without using EFI calls.

This is strongly not recommended. On HP chipset boxes, the devices
are only designed to be accessed via the EFI calls (and yes, EFI firmware can and does work around bugs in the RTC). There's also no architected way to find the real RTC in the address map. Why do you need to poke it directly?

Alex

-
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#4 lore raw
In reply to Christian Hildner
Quoted 11 lines · Matthew Wilcox
Quoted 4 lines · Christian Hildner

someone may know what kind of RTC device the ia64 platforms (HP ZX 6000
+ i2000) use. I want to access it directly, without using EFI calls.

It's probably different on each of them. Why do you want to access it without going through firmware?

It's just because I need rtc information in an environment where no EFI calls are possible. I am aware of the non-portability of doing so. But there is no other way.

Christian

#5 lore raw
In reply to Christian Hildner

Christian,

Quoted 10 lines · Christian Hildner
Quoted 8 lines · Matthew Wilcox
Quoted 4 lines · Christian Hildner

someone may know what kind of RTC device the ia64 platforms (HP ZX 6000
+ i2000) use. I want to access it directly, without using EFI calls.

Quoted 7 lines
Quoted 3 lines

It's probably different on each of them. Why do you want to access it without going through firmware?

It's just because I need rtc information in an environment where no EFI calls are possible. I am aware of the non-portability of doing so. But there is no other way.

What do you mean by "rtc information"? Are you after a very fine granularity timer?

Signature · 1 line
-Stephane
#6 lore raw
In reply to Christian Hildner
Quoted 10 lines · Alex Williamson
Quoted 6 lines · Christian Hildner

Hi,

someone may know what kind of RTC device the ia64 platforms (HP ZX 6000
+ i2000) use. I want to access it directly, without using EFI calls.

Quoted 5 lines

This is strongly not recommended. On HP chipset boxes, the devices
are only designed to be accessed via the EFI calls (and yes, EFI firmware can and does work around bugs in the RTC). There's also no architected way to find the real RTC in the address map.

So the only chance to access the rtc directly is to do it the same way the firmware does. Since the firmware is that hardware specific it does not need to "find" it because the firmware already knows where the rtc is and how to access it. If the rtc is not mapped in the conventional port address map, how does the firmware access it? Is there a firmware-only accessible io memory map or is it done with machine specific registers (msr)?

Quoted 3 lines

Why do you
need to poke it directly?

Because I need to call it from an environment, where no EFI calls are possible. I know that the solution is absolutely not portable in any way and in common it is bad doing that way but in that special case there is no other way to go. And the portability is given at another layer on top of it.

Christian

Quoted 2 lines

Alex

#7 lore raw
In reply to Christian Hildner
Quoted 25 lines · Stephane Eranian

Christian,

Quoted 20 lines · Christian Hildner
Quoted 16 lines · Matthew Wilcox
Quoted 6 lines · Christian Hildner

someone may know what kind of RTC device the ia64 platforms (HP ZX 6000
+ i2000) use. I want to access it directly, without using EFI calls.

It's probably different on each of them. Why do you want to access it without going through firmware?

Quoted 9 lines
Quoted 6 lines

It's just because I need rtc information in an environment where no EFI calls are possible. I am aware of the non-portability of doing so. But there is no other way.

What do you mean by "rtc information"? Are you after a very fine granularity timer?

I just need access to a rtc device on the HP ZX 6000 comparable to that Dallas devices on PC boards.

Christian

#8 lore raw
In reply to Christian Hildner

Christian,

Quoted 33 lines · Christian Hildner
Quoted 31 lines · Stephane Eranian

Christian,

Quoted 26 lines · Christian Hildner
Quoted 5 lines · Matthew Wilcox

On Tue, Jun 01, 2004 at 09:50:48AM +0200, Christian Hildner wrote:

Quoted 11 lines
Quoted 6 lines

someone may know what kind of RTC device the ia64 platforms (HP ZX 6000
+ i2000) use. I want to access it directly, without using EFI calls.

It's probably different on each of them. Why do you want to access it without going through firmware?

It's just because I need rtc information in an environment where no EFI calls are possible. I am aware of the non-portability of doing so. But there is no other way.

Quoted 7 lines
Quoted 4 lines

What do you mean by "rtc information"? Are you after a very fine granularity
timer?

I just need access to a rtc device on the HP ZX 6000 comparable to that Dallas devices on PC boards.

I am sorry but I don't know that device. What functionality of that device is of interest to you?

Signature · 1 line
-Stephane
#9 lore raw
In reply to Christian Hildner
Quoted 58 lines · Stephane Eranian

Christian,

Quoted 53 lines · Christian Hildner
Quoted 49 lines · Stephane Eranian

Christian,

Quoted 28 lines · Christian Hildner
Quoted 15 lines · Matthew Wilcox
Quoted 8 lines · Christian Hildner

someone may know what kind of RTC device the ia64 platforms (HP ZX 6000
+ i2000) use. I want to access it directly, without using EFI calls.

Quoted 7 lines

It's probably different on each of them. Why do you want to access it without going through firmware?

Quoted 8 lines

It's just because I need rtc information in an environment where no EFI calls are possible. I am aware of the non-portability of doing so. But there is no other way.

What do you mean by "rtc information"? Are you after a very fine granularity
timer?

Quoted 8 lines
Quoted 5 lines

I just need access to a rtc device on the HP ZX 6000 comparable to that Dallas devices on PC boards.

I am sorry but I don't know that device. What functionality of that device is of interest to you?

It is just getting an absolute time without any calls to firmware or linux.

Christian

#10 lore raw
In reply to Christian Hildner

Christian,

Quoted 9 lines
Quoted 7 lines
Quoted 4 lines

Dallas devices on PC boards.

I am sorry but I don't know that device. What functionality of that device is of interest to you?

It is just getting an absolute time without any calls to firmware or linux.

at least on UP, can't you use a combination of gettimeofday() once and then use ar.itc (equivalent of TSC) to make the appropriate adjustments. Also note that on 2.6 with the right version of glibc, gettimeofday() is extremely fast.

Signature · 1 line
-Stephane
#11 lore raw
In reply to Christian Hildner
Quoted 11 lines · Christian Hildner
Quoted 4 lines · Alex Williamson

On Tue, 2004-06-01 at 01:50, Christian Hildner wrote:
Why do you
need to poke it directly?

Because I need to call it from an environment, where no EFI calls are possible. I know that the solution is absolutely not portable in any way and in common it is bad doing that way but in that special case there is no other way to go. And the portability is given at another layer on top of it.

What are you doing with it? Can you just use ITC in the realtime sensitive portion of your code and then convert ITC ticks back into clock time as needed?

Robin Holt