Kernel OOPS (what looks like memory or interrupt handling issues to me)

Hello,

This is what I could get.

==========================
Process cc1plus (pid: 29992, threadinfo=c173a000 task=c1d74a10

Stack:      0000bba8 c00bb9c0 c124742c c03083fc 00000000 c0308380 c030849c c173bbc4
              c013725b c0308380 00000000 00000000 00000083 c0308380 
c0308380 c030848c
              c173bbf0 c0137623 c0308380 00000000 00ff00ff c030849c 

00000000 00000046

Call Trace:
 [<c013725b>] rmqueue_bulk+0xdb/0x140
 [<c0137624>] buffered_rmqueue+0x253/0x270
 [<c01376ec>] __alloc_pages+0xac/0x320
 [<c0137982>] __get_free_pages+0x22/0x50
 [<c013c694>] cache_grow+0x114/0x450
 [<c013cd51>] cache_alloc_refill+0x381/0x4d0
 [<c013d54b>] kmem_cache_alloc+0x19b/0x1c0
 [<c0253fdc>] alloc_skb+0x1c/0xe0
 [<c022dbe1>] tulip_refill_rx+0x91/0x100
 [<c0105d33>] handle_IRQ_event+0x33/0x60
 [<c0106239>] do_IRQ+0x119/0x2f0
 [<c0104688>] common_interrupt+0x18/0x20
 [<c01159b3>] panic+0xc3/e0
 [<c0104d94>] die+0x154/0x1e0
 [<c010f320>] do_page_fault+0x260/0x574
 [<c0241d82>] ide_build_sglist+0x32/0xb0
 [<c011e5f7>] __mod_timer+0x247/0x670
 [<c0110526>] recalc_task_prio+0xab/0x200
 [<c0241d82>] ide_build_sglist+0x32/0xb0
 [<c010f0c0>] do_page_fault+0x0/0x574
 [<c01046cd>] error_code+0x2d/0x40
 [<c0132c35>] unlock_page+0x25/0x50
 [<c0151186>] end_swap_bio_read+0x36/0x50
 [<c015ded5>] bio_endio+0x45/0x70
 [<c021d6a7>] __end_that_request_first+0x1d7/0x230
 [<c0238be8>] ide_end_request+0xb8/0x220
 [<c0241d2d>] ide_dma_intr+0x6d/0x90
 [<c023a935>] ide_intr+0x245/0x4c0
 [<c0241cc0>] ide_dma_intr+0x0/0x90
 [<c0105d33>] handle_IRQ_event+0x33/0x60
 [<c0106239>] do_IRQ+0x119/0x2f0
 [<c0104688>] common_interrupt+0x18/0x20

Code: 89 02 89 50 04 c7 01 00 01 10 00 c7 41 04 00 02 20 00 8b 55

<0>Kernel Panic: Fatal exception in interrupt
In interrupt handler - not synching
==========================

Getting this in your logs looks rather - hmm - amusing, to say the least:

Jun  1 02:27:01 slowcoach CRON[29951]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Jun  1 02:28:01 slowcoach CRON[29967]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Jun  1 02:29:01 slowcoach CRON[29978]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Jun  1 02:30:00 slowcoach CRON[29995]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Jun  1 08:00:52 slowcoach syslog-ng[5253]: syslog-ng version 1.6.0rc3 starting

Anyway, I also attach my .config file.

# uname -a
Linux slowcoach 2.6.6 #2 Sat May 22 16:17:30 SAST 2004 i586 Pentium 75 - 200 GenuineIntel GNU/Linux
# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 5
model           : 2
model name      : Pentium 75 - 200
stepping        : 4
cpu MHz         : 90.088
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : yes
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de tsc msr mce cx8
bogomips        : 174.59
# cat /proc/interrupts
          CPU0      
 0:   21316411          XT-PIC  timer
 1:        984          XT-PIC  i8042
 2:          0          XT-PIC  cascade
 4:         50          XT-PIC  serial
 8:          2          XT-PIC  rtc
11:      63961          XT-PIC  eth0
14:      17038          XT-PIC  ide0
15:      17317          XT-PIC  ide1
NMI:          0
ERR:          0

I also have vm.min_free_kbytes = 1024 in /etc/sysctl.conf, which is already 4 times the default value for my 64MB ram.

This info was gathered on a clean boot - obviously.

Jaco