borrowing
I have
- HZ - recompiled to 1000
- class nr 1 - 2kbit ceil 1024kbit
- class nr 2 - 16kbit ceil1024kbit
But class 1 works with 20kbit/sec and class 2 with 60kbit/sec. The proportion does not seems right.
Thank you.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I have
- HZ - recompiled to 1000
- class nr 1 - 2kbit ceil 1024kbit
- class nr 2 - 16kbit ceil1024kbit
- prio 3 to all classes
But class 1 works with 20kbit/sec and class 2 with 60kbit/sec. The proportion does not seems right.
Thank you.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · victor
I have
- HZ - recompiled to 1000
- class nr 1 - 2kbit ceil 1024kbit
- class nr 2 - 16kbit ceil1024kbit
- prio 3 to all classesBut class 1 works with 20kbit/sec and class 2 with 60kbit/sec. The proportion does not seems right.
This is still possible because the rates also depends on quantum and the size of the packets. Try the same tests with higher rates.
Stef
Signature · 6 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/