DMA feature question.
I have a sound card that requires access to 2 DMA areas per substream.
1) Is for the audio samples buffer. I can already do that with:
err = snd_pcm_lib_preallocate_pages(substream, SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(emu->pci), 32*1024, 32*1024);
2) Is for a table of periods..
This table will contain:-
{ u32 Pointer_into_samples_buffer,
u32 number_of_bytes }
So, each record in the table is 8 bytes long, and identify each period in the buffer.
So, the table will contain a list of the different periods.
So, if there are 8 periods, the table will have 8 entries, each 8 bytes long, so I will need a DMA map for 64 bytes.
Is there any way to use the snd_pcm_lib_preallocate_pages() for this "table or periods".
If not, I will just have to make (1) a bit bigger, and place the "table of periods" in there.
Cheers
James
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
At Sat, 26 Jun 2004 15:44:32 +0100,
Quoted 15 lines · James Courtier-Dutton
I have a sound card that requires access to 2 DMA areas per substream.
1) Is for the audio samples buffer. I can already do that with:err =
snd_pcm_lib_preallocate_pages(substream, SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(emu->pci), 32*1024, 32*1024);2) Is for a table of periods..
This table will contain:-
{ u32Pointer_into_samples_buffer,
u32number_of_bytes}
So, each record in the table is 8 bytes long, and identify each period in the buffer.
Quoted 6 lines
So, the table will contain a list of the different periods. So, if there are 8 periods, the table will have 8 entries, each 8 bytes long, so I will need a DMA map for 64 bytes.
Is there any way to use the
snd_pcm_lib_preallocate_pages()for this "table or periods".
No. It's for the DMA buffer only.
Quoted 2 lines
If not, I will just have to make (1) a bit bigger, and place the "table of periods" in there.
I don't think it's a good idea.
The buffer will be mmapped to the user-space, and obviously you don't want to expose it.
I'd suggest to allocate a table (one page should be large enough) via snd_dma_alloc_pages() statically at the driver initialization, and sets the max. number of periods according to the page size.
Takashi
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
Quoted 6 lines · Takashi Iwai
Quoted 1 line
If not, I will just have to make (1) a bit bigger, and place the "table of periods" in there.
I don't think it's a good idea.
The buffer will be mmapped to the user-space, and obviously you don't want to expose it.
The terms "Massive security hole!" comes to mind!
Quoted 9 lines
I'd suggest to allocate a table (one page should be large enough) via
snd_dma_alloc_pages()statically at the driver initialization, and sets the max. number of periods according to the page size.Takashi
Is a page 1024 bytes or 4096 bytes? Does it vary depending on which type of CPU is in use? Is there a sensible minimum size to set it.
I only need to allow for a max of 16 periods per buffer. (does anyone need >16 periods per buffer ? ) There are 4 channels, with 8 bytes per period, that gives 16*4*8 = 512 bytes.
Thanks, I will use snd_dma_alloc_pages().
For your info, this is for the AudigyLS driver.
Cheers
James
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
At Mon, 28 Jun 2004 18:32:58 +0100,
Quoted 18 lines · James Courtier-Dutton
Quoted 7 lines · Takashi Iwai
Quoted 2 lines
If not, I will just have to make (1) a bit bigger, and place the "table of periods" in there.
I don't think it's a good idea.
The buffer will be mmapped to the user-space, and obviously you don't want to expose it.The terms "Massive security hole!" comes to mind!
Quoted 6 lines
I'd suggest to allocate a table (one page should be large enough) via
snd_dma_alloc_pages()statically at the driver initialization, and sets the max. number of periods according to the page size.
Quoted 5 lines
Quoted 3 lines
Takashi
Is a page 1024 bytes or 4096 bytes?
4k on i386.
Quoted 2 lines
Does it vary depending on which type
of CPU is in use?
Yes, but 4k is minimal, so far.
Quoted 6 lines
Is there a sensible minimum size to set it.
I only need to allow for a max of 16 periods per buffer. (does anyone need >16 periods per buffer ? )
There are 4 channels, with 8 bytes per period, that gives 16*4*8 = 512 bytes.
Then a single page should suffice.
(of course you can add a code to check the page size to be sure.)
Takashi
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com