Apple BT Keyboard?

I've been flagging the discussions about it in the past few weeks, but I'm not up with the whole process of what I'm supposed to do, and I haven't been able to piece it together from what I've seen.

I have my MX900 working in 2.4.26 using bthid & hcid.... I don't seem to have hidd... (I have to press the Connect button and do a bthid -c $ADDR after leaving the mouse 20min or the first time I use it.)

What do I need to get the keyboard working? Is it worthwhile attempting this with 2.4? Slackware 10 is out and I'm playing with it in 2.6, but I have many other requirements (I'm an on site network tech, lots of fancy stuff in my kernel) so I'm not stable in 2.6 yet.

Myke

-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Hi,

you might check my HOWTO, which details the steps and provide some explanations.

http://www.bueche.ch/comp/mx900/mx900.html

Regs,
Charles

-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Hi Mykel,

the hidd is in bluez-utils-2.7 and needs a 2.6.7-mh1 kernel with activated HIDP kernel module.

Pressing the connect button is only needed for the initial connection and after that the mouse will reconnect to you. For that you must run "hidd --server".

I propose that you install 2.6.7-mh1 with hidp.ko and use hidd.

Regards

Marcel

-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

YAHOO!!!! :)

http://ars.userfriendly.org/cartoons/read.cgi?id=20040813&tid=1296099

So... here's what I think I did to make this work (I hope I can do this after I reboot :)

-> modprobe hidp
-> hcid
-> hidd --server
-> Press connect on MX900
-> hidd --connect 00:07:61:14:5C:A7
-> Wiggle mouse (I initially got stumped here because I forgot to add the following to my xorg.conf:
<stuff>
Section "InputDevice"
Identifier "MX900IMPS"
Driver "mouse"
Option "Protocol" "imps/2"
# Option "Device" "/dev/mouse"
Option "Device" "/dev/input/mice"
# Option "Resolution" "256"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
Option "Emulate3Buttons" "false"
EndSection
...
InputDevice 'TouchPad' 'CorePointer'
InputDevice 'MX900IMPS' 'SendCoreEvents'
InputDevice 'Keyboard1' 'CoreKeyboard'
</stuff>
I'm actually surprised they keyboard comes up as regular keyboard input (caps lock keeps sync too! :) anyway... -> sdpd
-> Turn on keyboard
-> hidd --connect 00:0A:95:3A:29:6D
-> hit "0000^M" very quickly
-> magic!

Now - I need some help with the PIN stuff...
I don't understand what is supposed to do what/be what...
Is my keyboard data encrypted or should I not type my passwords on it? (I have geek friends... who knows what evil they might enjoy one day :\)

currently, my /usr/bin/bluepin is:

root@immutable:~# cat /usr/bin/bluepin
#!/bin/sh
echo -n "PIN:0000"

aside from changing the number, is there any better I can do?

I tried compiling blue-pin (2.9) but I get this:

root@immutable:/usr/src/bluez29/bluez-pin-0.23# make
cc -O2 -g `pkg-config --cflags gtk+-2.0 libglade-2.0 dbus-glib-1 gconf-2.0` -DGTK_DISABLE_DEPRECATED -DDBUS_API_SUBJECT_TO_CHANGE -Wall -Os -fomit-frame-pointer -DPACKAGE=\"bluez-pin\" -DPREFIX=\"/usr/local\" -DPACKAGE_LOCALE_DIR=\"/usr/local/share/locale\"   -c main.c -o main.o
Package dbus-glib-1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `dbus-glib-1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'dbus-glib-1' found
main.c:20:21: gtk/gtk.h: No such file or directory
main.c:22:23: dbus/dbus.h: No such file or directory
main.c:23:28: dbus/dbus-glib.h: No such file or directory
In file included from main.c:25:
... and more errors
(This is on a full install of Slackware 10)

I'm getting the impression that when I try and connect to a device that wants a PIN, some GTK window is supposed to prompt me for a PIN? Can someone give me some pointers here?

I'm still happy! Should've washed the pool cue chalk off my hands BEFORE I started using my white keyboard tho ;\

Myke