alsa formats explained?
Quoted 7 lines · James Courtier-Dutton
I need to send 32bits for each sample to a sound card. The contents of the value is LE.
The card only takes notice of the high 24bits.0xffffff00Which alsa format string should I use in the alsa driver to tell alsa-lib to send samples in this format.
Quoted 8 lines
I want alsa-lib to be able to do the correct conversions:
E.g. 8bit samples ->0xff00000016bit samples -> 0xffff0000 24bit samples -> 0xffffff00 32bit samples -> 0xffffffff (but the lower 8 bits 0x000000ff willbe dropped by the hardware.)
I think I should use
S32_LE, but I wanted to verify that here first.
Correct.
Quoted 5 lines
I can find a bit of the alsa docs explaining this, but it seems a bit unclear to me. Maybe a diagram should be added or something like this:
S32_LE, alsa-lib sends to the hardware 24bit samples ->0xffffff00S24_LE, alsa-lib sends to the hardware 24bit samples ->0x00ffffff(^ I think it works like that ^)
Correct.
Quoted 8 lines
Here is what I found:
"24-bit linear samples are using three low bytes from the 32-bit word. When hardware uses 24-bit format in 32-bit linear samples (the low byte is ignored), then the sample format is 32-bit, and themsbits_per_samplemember from thesnd_pcm_channel_setup_tstructure shows count of most significant bits being used (24 in this case). The other formats (for example 20-bit linear sample stored in the 32-bit linear sample) may follow this example as well."
What's unclear?
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SUSE Labs
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
I need to send 32bits for each sample to a sound card. The contents of the value is LE.
The card only takes notice of the high 24bits. 0xffffff00
Which alsa format string should I use in the alsa driver to tell alsa-lib to send samples in this format.
I want alsa-lib to be able to do the correct conversions:
E.g. 8bit samples -> 0xff000000
16bit samples -> 0xffff0000
24bit samples -> 0xffffff00
32bit samples -> 0xffffffff (but the lower 8 bits 0x000000ff will be dropped by the hardware.)
I think I should use S32_LE, but I wanted to verify that here first.
I can find a bit of the alsa docs explaining this, but it seems a bit unclear to me. Maybe a diagram should be added or something like this:S32_LE, alsa-lib sends to the hardware 24bit samples -> 0xffffff00S24_LE, alsa-lib sends to the hardware 24bit samples -> 0x00ffffff
(^ I think it works like that ^)
Here is what I found:
"24-bit linear samples are using three low bytes from the 32-bit word. When hardware uses 24-bit format in 32-bit linear samples (the low byte is ignored), then the sample format is 32-bit, and the msbits_per_sample member from the snd_pcm_channel_setup_t structure shows count of most significant bits being used (24 in this case). The other formats (for example 20-bit linear sample stored in the 32-bit linear sample) may follow this example as well."
Cheers
James
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com