Skip to contentSkip to conversation

2.6.7, amd64: PS/2 Mouse detection doesn't work

DISCUSSION Harald Dunkel 3 participants 9 messages Jul 11, 2004 – Oct 21, 2004 PCI

lore
Share & tools
lore
#0 lore raw

Hi folks,

Most of the times my mouse is detected as generic PS/2, even though it is a Logitech. I have to reload the mousedev and psmouse modules to make it work.

# grep -i mouse /var/log/kern.log
Jul 10 17:23:08 r101 kernel: input: PS/2 Generic Mouse on isa0060/serio1
Jul 10 17:23:08 r101 kernel: mice: PS/2 mouse device common for all mice
Jul 10 17:24:59 r101 kernel: input: PS/2 Generic Mouse on isa0060/serio1
Jul 10 17:24:59 r101 kernel: mice: PS/2 mouse device common for all mice
Jul 10 17:43:41 r101 kernel: input: PS2++ Logitech Mouse on isa0060/serio1
Jul 10 17:43:41 r101 kernel: mice: PS/2 mouse device common for all mice
Jul 10 17:46:59 r101 kernel: input: PS2++ Logitech Mouse on isa0060/serio1
Jul 10 17:47:00 r101 kernel: mice: PS/2 mouse device common for all mice
Jul 11 07:34:34 r101 kernel: input: PS/2 Generic Mouse on isa0060/serio1
Jul 11 07:34:34 r101 kernel: mice: PS/2 mouse device common for all mice
Jul 11 07:36:01 r101 kernel: input: PS/2 Generic Mouse on isa0060/serio1
Jul 11 07:36:01 r101 kernel: mice: PS/2 mouse device common for all mice
Jul 11 08:43:33 r101 kernel: mice: PS/2 mouse device common for all mice
Jul 11 08:43:33 r101 kernel: input: PS2++ Logitech Mouse on isa0060/serio1

Usually I wouldn't care, but I can go mad if the 4th mouse button doesn't work :-).

Any idea?

Regards

Harri

#1 lore raw
Quoted 23 lines · Harald Dunkel

Hi folks,

Most of the times my mouse is detected as generic PS/2, even though it is a Logitech. I have to reload the mousedev and psmouse modules to make it work.

# grep -i mouse /var/log/kern.log
Jul 10 17:23:08 r101 kernel: input: PS/2 Generic Mouse on isa0060/serio1
Jul 10 17:23:08 r101 kernel: mice: PS/2 mouse device common for all mice
Jul 10 17:24:59 r101 kernel: input: PS/2 Generic Mouse on isa0060/serio1
Jul 10 17:24:59 r101 kernel: mice: PS/2 mouse device common for all mice
Jul 10 17:43:41 r101 kernel: input: PS2++ Logitech Mouse on isa0060/serio1
Jul 10 17:43:41 r101 kernel: mice: PS/2 mouse device common for all mice
Jul 10 17:46:59 r101 kernel: input: PS2++ Logitech Mouse on isa0060/serio1
Jul 10 17:47:00 r101 kernel: mice: PS/2 mouse device common for all mice
Jul 11 07:34:34 r101 kernel: input: PS/2 Generic Mouse on isa0060/serio1
Jul 11 07:34:34 r101 kernel: mice: PS/2 mouse device common for all mice
Jul 11 07:36:01 r101 kernel: input: PS/2 Generic Mouse on isa0060/serio1
Jul 11 07:36:01 r101 kernel: mice: PS/2 mouse device common for all mice
Jul 11 08:43:33 r101 kernel: mice: PS/2 mouse device common for all mice
Jul 11 08:43:33 r101 kernel: input: PS2++ Logitech Mouse on isa0060/serio1
Quoted 4 lines

Usually I wouldn't care, but I can go mad if the 4th mouse button doesn't work :-).

Any idea?

Build the USB drivers into the kernel, or use the attached patch. If it helps, please tell me.

Signature · 2 lines
Vojtech Pavlik
SuSE Labs, SuSE CR

[email protected], 2004-04-03 23:30:39+02:00, [email protected]
input: Disable USB Legacy emulation in PCI quirks.

 quirks.c |   62 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 62 insertions(+)
drivers/pci/quirks.c +66 -0
diff -Nru a/drivers/pci/quirks.c b/drivers/pci/quirks.c
@@ -868,6 +868,68 @@
 }
 #endif /* CONFIG_SCSI_SATA */
 
+
+#define UHCI_USBLEGSUP		0xc0		/* legacy support */
+#define UHCI_USBCMD		0		/* command register */
+#define UHCI_USBINTR		4		/* interrupt register */
+#define UHCI_USBLEGSUP_DEFAULT	0x2000		/* only PIRQ enable set */
+#define UHCI_USBCMD_GRESET	0x0004		/* Global reset */
+
+#define OHCI_CONTROL		0x04
+#define OHCI_CMDSTATUS		0x08
+#define OHCI_INTRENABLE		0x10
+#define OHCI_OCR		(1 << 3)	/* ownership change request */
+#define OHCI_CTRL_IR		(1 << 8)	/* interrupt routing */
+#define OHCI_INTR_OC		(1 << 30)	/* ownership change */
+
+#if defined(__i386__) || defined(__x86_64__)
+static void __init quirk_usb_disable_smm_bios(struct pci_dev *pdev)
+{
+
+	if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
+		int i;
+		unsigned long base = 0;;
+
+		for (i = 0; i < PCI_ROM_RESOURCE; i++) 
+			if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
+				base = pci_resource_start(pdev, i);
+				break;
+			}
+
+		if (!base)
+			return;
+
+		outw(0, base + UHCI_USBINTR);
+		outw(UHCI_USBCMD_GRESET, base + UHCI_USBCMD);
+		set_current_state(TASK_UNINTERRUPTIBLE);
+       		schedule_timeout((HZ*50+999) / 1000);
+		outw(0, base + UHCI_USBCMD);
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout((HZ*10+999) / 1000);
+
+		pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
+	}
+
+	if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
+		char *base = ioremap_nocache(pci_resource_start(pdev, 0),
+							pci_resource_len(pdev, 0));
+		if (base == NULL) return;
+
+		if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
+			int temp = 500;     /* arbitrary: five seconds */
+			writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
+			writel(OHCI_OCR, base + OHCI_CMDSTATUS);
+			while (temp && readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
+				temp--;
+				set_current_state(TASK_UNINTERRUPTIBLE);
+				schedule_timeout( HZ / 100);
+			}
+		}
+		iounmap(base);
+	}
+}
+#endif
+
 /*
  *  The main table of quirks.
  *
@@ -983,6 +1043,10 @@
 	{ PCI_FIXUP_FINAL,      PCI_VENDOR_ID_INTEL,    PCI_ANY_ID,
 	  quirk_intel_ide_combined },
 #endif /* CONFIG_SCSI_SATA */
+
+#if defined(__i386__) || defined(__x86_64__)
+	{ PCI_FIXUP_FINAL,	PCI_ANY_ID,		PCI_ANY_ID,			quirk_usb_disable_smm_bios },
+#endif
 
 	{ 0 }
 };
#2 lore raw
Quoted 13 lines · Vojtech Pavlik
Quoted 5 lines · Harald Dunkel

Usually I wouldn't care, but I can go mad if the 4th mouse button doesn't work :-).

Any idea?

Build the USB drivers into the kernel, or use the attached patch. If it helps, please tell me.

I tried the patch: Seems to work. After a power cycle the mouse was detected as

Jul 11 15:09:29 r101 kernel: input: PS2++ Logitech Mouse on isa0060/serio1
Jul 11 15:09:29 r101 kernel: mice: PS/2 mouse device common for all mice

as expected.

Many thanx

Harri

#3 lore raw
In reply to Vojtech Pavlik
Quoted 4 lines · Vojtech Pavlik

Build the USB drivers into the kernel, or use the attached patch. If it helps, please tell me.

The patch worked, as written before. Would it be possible to permanently add it to the kernel for 2.6.8-rc3?

Many thanx

Harri

#4 lore raw
In reply to Vojtech Pavlik

Hi folks,

Quoted 8 lines · Vojtech Pavlik
Quoted 6 lines · Harald Dunkel

Hi folks,

Most of the times my mouse is detected as generic PS/2, even though it is a Logitech. I have to reload the mousedev and psmouse modules to make it work.

Would it be possible to get Vojtech's patch in for 2.6.8? Or are there some unpredictable side effects?

Many thanx

Harri

#5 lore raw
In reply to Vojtech Pavlik

Hi folks,

Attached you can find an updated patch for 2.6.9.

Regards

Harri

drivers/pci/quirks.c renamed from tmp/linux-2.6.9/drivers/pci/quirks.c +63 -0
@@ -826,6 +826,69 @@
 	pci_read_config_byte(dev, 0x77, &val);
 }
 
+
+#define UHCI_USBLEGSUP		0xc0		/* legacy support */
+#define UHCI_USBCMD		0		/* command register */
+#define UHCI_USBINTR		4		/* interrupt register */
+#define UHCI_USBLEGSUP_DEFAULT	0x2000		/* only PIRQ enable set */
+#define UHCI_USBCMD_GRESET	0x0004		/* Global reset */
+
+#define OHCI_CONTROL		0x04
+#define OHCI_CMDSTATUS		0x08
+#define OHCI_INTRENABLE		0x10
+#define OHCI_OCR		(1 << 3)	/* ownership change request */
+#define OHCI_CTRL_IR		(1 << 8)	/* interrupt routing */
+#define OHCI_INTR_OC		(1 << 30)	/* ownership change */
+
+#if defined(__i386__) || defined(__x86_64__)
+static void __init quirk_usb_disable_smm_bios(struct pci_dev *pdev)
+{
+
+	if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
+		int i;
+		unsigned long base = 0;;
+
+		for (i = 0; i < PCI_ROM_RESOURCE; i++) 
+			if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
+				base = pci_resource_start(pdev, i);
+				break;
+			}
+
+		if (!base)
+			return;
+
+		outw(0, base + UHCI_USBINTR);
+		outw(UHCI_USBCMD_GRESET, base + UHCI_USBCMD);
+		set_current_state(TASK_UNINTERRUPTIBLE);
+       		schedule_timeout((HZ*50+999) / 1000);
+		outw(0, base + UHCI_USBCMD);
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout((HZ*10+999) / 1000);
+
+		pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
+	}
+
+	if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
+		char *base = ioremap_nocache(pci_resource_start(pdev, 0),
+							pci_resource_len(pdev, 0));
+		if (base == NULL) return;
+
+		if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
+			int temp = 500;     /* arbitrary: five seconds */
+			writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
+			writel(OHCI_OCR, base + OHCI_CMDSTATUS);
+			while (temp && readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
+				temp--;
+				set_current_state(TASK_UNINTERRUPTIBLE);
+				schedule_timeout( HZ / 100);
+			}
+		}
+		iounmap(base);
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID,		PCI_ANY_ID,			quirk_usb_disable_smm_bios );
+#endif
+
 /*
  * ... This is further complicated by the fact that some SiS96x south
  * bridges pretend to be 85C503/5513 instead.  In that case see if we
#6 lore raw
Quoted 3 lines · Harald Dunkel

Hi folks,

Attached you can find an updated patch for 2.6.9.

You need to handle the USB reset quirks for OHCI and also catch any escaped interrupts. It also seems you have to deal with UHCI (at least my E750x fixes arent sufficient with a keyboard on an EHCI hub)

#7 lore raw
Quoted 11 lines · Alan Cox
Quoted 3 lines · Harald Dunkel

Hi folks,

Attached you can find an updated patch for 2.6.9.

You need to handle the USB reset quirks for OHCI and also catch any escaped interrupts. It also seems you have to deal with UHCI (at least my E750x fixes arent sufficient with a keyboard on an EHCI hub)

I am not a kernel developer. I just modified Vojtech's patch for 2.6.9. His patch works for me since 2.6.7.

But it seems that UHCI _is_ handled, isn't it?

Regards

Harri

#8 lore raw
Quoted 4 lines · Harald Dunkel

I am not a kernel developer. I just modified Vojtech's patch for 2.6.9. His patch works for me since 2.6.7.

But it seems that UHCI _is_ handled, isn't it?

Braino .. I meant EHCI