swsuspend still breaks 3c905, 2.6.7

Suspend and the 3com card becomes useless. Have to remove the module or reboot. Seems to be a pretty common and long-standing bug with the power management and has been around since at least the middle 2.5.xx kernels. And it seems it's also in 2.4.x.

NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status ff status ffff.
diagnostics: net ffff media ffff dma ffffffff fifo ffff
eth0: Transmitter encountered 16 collisions -- network cable problem?
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 0(0) current 16(0)
Transmit list ffffffff vs. e4aae200.
eth0: command 0x3002 did not complete! Status=0xffff

 0: @e4aae200  length 8000002a status 0000002a
 1: @e4aae2a0  length 8000002a status 0000002a
 2: @e4aae340  length 8000002a status 0000002a
 3: @e4aae3e0  length 8000002a status 0000002a
 4: @e4aae480  length 8000004c status 0000004c
 5: @e4aae520  length 8000002a status 0000002a
 6: @e4aae5c0  length 8000002a status 0000002a
 7: @e4aae660  length 8000002a status 0000002a
 8: @e4aae700  length 8000002a status 0000002a
 9: @e4aae7a0  length 8000004c status 0000004c
 10: @e4aae840  length 8000002a status 0000002a
 11: @e4aae8e0  length 8000002a status 0000002a
 12: @e4aae980  length 8000002a status 0000002a
 13: @e4aaea20  length 8000002a status 0000002a
 14: @e4aaeac0  length 8000004c status 8000004c
 15: @e4aaeb60  length 8000002a status 8000002a

eth0: command 0x5800 did not complete! Status=0xffff
eth0: Resetting the Tx ring pointer.

Chris root # lspci -v -s 2:0.0
02:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
Subsystem: Dell Computer Corporation: Unknown device 00d4
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at ec80 [size=128]
Memory at f8fffc00 (32-bit, non-prefetchable) [size=128] Expansion ROM at f9000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2

David