routing mail on a different gateway
Quoted 59 lines · Justin Michael
If you use qmail you can use the outgoing IP patch, this is what I had to do, I had no luck trying to get it to work with iptables, although if you do, please inform me how :)
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Julien
Sent: Friday, July 23, 2004 8:33 AM
To: [email protected]
Subject: Re: routing mail on a different gatewayQuoted 27 lines · Julien
Good Morning,
I have a linux box with two dsl modems on it (connection is done via pppoe), I'm trying to route default traffic on the primary connection (ppp0) and mail traffic on another one (ppp1).
This traffic should be able to come from the localhost or the lan via NAT.
I run Slackware 9.1 (Kernel 2.4.22), recompiled with necessary options for using iproute2.
According to the advanced routing howto, I did the following :
iptables −A PREROUTING −i eth0 −t mangle −p tcp −−dport 25 −j MARK −−set−mark 1 iptables −A PREROUTING −i lo −t mangle −p tcp −−dport 25 −j MARK −−set−mark 1
I'm not sure whether "lo" is needed.
echo 201 mail.out >>
/etc/iproute2/rt_tables
ip rule add fwmark 1 table mail.out
/sbin/iproute add default via [Second's ISP Gateway] dev ppp1 table mail.outI get no error message, and ip rule ls and ip route show params where recorded.
But if I do telnet somemail.server.com 25, I get a timeout and no data is sent via ppp1 (seen using ifconfig ppp1 or tcpdump -i ppp1).
I can't figure what can be wrong nor where I should start looking for. I also looked in the ip-cref doc and found nothing that could help me.
Quoted 9 lines
Feel free to ask me on any point I would have forgotten.
Do you have an idea in order to solve this problem ?
Thanks, in advance !
Julien.
Now I changed iptables line to :
iptables −A OUTPUT −t mangle −p tcp −−dport 25 −j MARK −−set−mark 1
in order to mangle packets locally generated, that works better since I want to route local postfix's traffic.
When I do telnet smtp.someisp.com 25, I see with tcpdump the packets going out through the interface ppp1 :
14:32:40.693429 62.212.120.196.34515 > 193.252.22.80.smtp: S 4069327741:4069327741(0) win 5808 <mss 1452,sackOK,timestamp 929359 0,nop,wscale 0> (DF) [tos
0x10]
Quoted 9 lines
But the problem is that there are originated from 62.212.120.196, which is the ip of ppp0, not ppp1. So packets can't take the way back.
How can I change the "from" ip of packets that are routed through ppp1 ?
Thanks for your help.
Julien
In fact, I'm running postfix so I can't do it this manner. But thanks for telling me that was possible, it's an interesting solution for doing that.
Regarding iproute2, it's almost working for me as you can see. I if succeed I'll sure tell you.
Julien