Will this work?
I am looking into feasability of building a bluetooth-based item that could be controlled easily from any pc (mostly with linux) for the purposes of home automation, and I have come upon several bluetooth dongles with serial ports on them (for example this one: http://www.socketcom.com/product/CS0400-479.asp), claiming to support General Access Profile, Service Discovery Profile and Serial Port**** profiles, as well as driverless operation with any serial device (configuration can be done via AT commands).
Obviously no-one will know the specifics of this particular device, but in principle, with the tools that are available under linux at the moment, would it be possible to establish a connection to the device and then send data to it just like an attached serial device? I understand that serial emulation is available under the bluez package, but how far does it go? Can one control individual pins, or is it just as a stream of bytes? My primary idea is to use it inside something like a lamp so that, for example, the brightness can be controlled, or a coffee machine, or anything.
And if it is possible, is it also sensible to do it in this way? I understand that bluetooth chips are down to ~$5 (US), but this item is going for ~$170 (US). It there a more cost-effective way of talking to a number of bluetooth devices?
Sorry for the long post, and many thanks for any thoughts you might have
-Oli **
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users