Skip to contentSkip to conversation

marking passive ftp and shaping

LARTC nix4me 2 participants 2 messages Aug 5, 2004 – Aug 8, 2004

lore
Share & tools
lore

nix4me

author
#0 lore raw

I am trying to mark outbound passive ftp traffic with iptables and shape it to 35KBytes. I am using the following script on the computer that runs the ftp server.

It is not working correctly, it seems to limit ALL traffic. Cant file share or anything.

Anyone might know what is wrong?

#!/bin/bash
#shaping passive ftp traffic

# mark the outbound passive ftp packets on ports 50000-51000
iptables -t mangle -D POSTROUTING -o eth0 -j MYSHAPER-OUT 2> /dev/null > 
/dev/null
iptables -t mangle -F MYSHAPER-OUT 2> /dev/null > /dev/null
iptables -t mangle -X MYSHAPER-OUT 2> /dev/null > /dev/null

iptables -t mangle -N MYSHAPER-OUT
iptables -t mangle -I POSTROUTING -o eth0 -j MYSHAPER-OUT

iptables -t mangle -A MYSHAPER-OUT -p tcp --dport 50000:51000 -j MARK --set-mark 1

# shape the traffic to 35Kbytes
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1: htb
tc class add dev eth0 parent 1: classid 1:1 htb rate 35kbps
tc filter add dev eth0 parent 1:  prio 0 protocol ip handle 1 fw flowid 1:1
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 3 lines · nix4me wrote:

It is not working correctly, it seems to limit ALL traffic. Cant file share or anything.

I'm new to traffic control, so maybe I shouldn't try to help, but you only have 1 qdisc DEFINED to service the device. You also don't specify a default via that definition.

According to http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm - Now we can optionally attach queuing disciplines to the leaf classes. If none is specified the default is pfifo.

This seems to say that you get another qdisc for your one and only class, but where is your other traffic going? That same site shows examples that don't rely on defaults. Maybe you should consider stating explicitely what you want as the defaults the system is giving you may be your problem.

Signature · 8 lines
Bill Gradwohl
[email protected]
http://www.ycc.com
SPAMstomper Protected email

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/