Skip to contentSkip to conversation

Advanced Routing and FreeSwan

LARTC Philip Reetz 1 participant 1 message Aug 12, 2004

lore
Share & tools
lore
#0 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,
I'm trying to setup a central IPSEC-Gateway with several ipsec tunnels. Some are to be routed over one leased line, some over the other leased line. Both leased lines have their own public ip adress.
The setup looks kinda like this:

eth1(ipsec0)--ISP0--Internet--eth1-Linux1-eth0--Subnet1

                                  /
(ipsec-tunnel0)
Intranet--eth0-Linux-HQ
                                  \

(ipsec-tunnel1)

eth2(ipsec1)--ISP1--Internet--eth1-Linux2-eth0--Subnet2

I wanted to use the advanced routing features (ip command) of the linux kernel to solve the routing issues. When advanced routing is activated I can start tunnel0. After a few seconds their is still traffic on ipsec0 but not eth1.
When I deactivate advanced routing and bring down eth2, tunnel0 works flawlessly.
I used Debian Stable with kernel 2.4.20
Freeswan: 1.98b

The setup for the advanced routing looks like this:
- -snip-
#!/bin/sh

function ip {
echo ip "$@"
/sbin/ip "$@"
}

[ "$DEBUG" != "1" ] && unset ip

# P1 Gateway, P1_NET Network address, IP1 local address, IF1 interfac e
export IF1=eth0
export IP1!2.202.224.34
export P1!2.202.224.33
export P1_NET!2.202.224.32/29

export IF2=eth2
export IP2ƒ.236.132.166
export P2ƒ.236.132.165
export P2_NETƒ.236.132.164/30

if [ "$1" = "start" ]; then
echo 'Setting up advanced routing'

ip route add $P1_NET via $P1 src $IP1 table qsc1 ip route add default via $P1 table qsc1 ip route add $P2_NET via $P2 src $IP2 table qsc2 ip route add default via $P2 table qsc2 ip route add 192.168.2.0/24 dev ipsec0 table qsc1

ip rule add from $IP1 table qsc1
ip rule add from $IP2 table qsc2

ip route flush cache

elif [ "$1" = "stop" ]; then
ip route flush table qsc1
ip route flush table qsc2

ip rule del from $IP1 table qsc1
ip rule del from $IP2 table qsc2

ip route flush cache

echo 'Stopping advanced routing'
else
echo 'Unknown parameter '$1
fi

Any help is greatly appreciated.

Ciao,
Philip
- --
LINET Services GbR

Gotenweg 15 Tel.: 0531-280 191 71
38106 Braunschweig Fax.: 0531-280 191 72

http://www.linet-services.de
mailto:[email protected]

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
Comment: Using GnuPG with Debian - http://enigmail.mozdev.org

iD8DBQFBG27yHf7qoDPJh6ERAks7AKC8hMMukXnAaA2SKhik+EJUu7ukewCgvL4o 4tNDTbFs09eEbAg6lcVSJsQ=buZw
-----END PGP SIGNATURE-----
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/