Firewalling certain IP ranges
Hi,
I have a linux router which is connected to a local network and the internet (eth0 and eth1). My local network (eth0) consists of two IP ranges, which are assigned by a DHCP server on my router - 10.0.0.2-10.0.0.19 for trusted clients (MAC addresses are known) and 10.0.0.20-10.0.0.254 for untrusted clients (MAC addresses are not known). These two ranges share the same physical network, which is partly wireless, hence the trusted/untrusted hosts setup.
Some trusted clients are on the wireless network, most are on wired. All untrusted clients are on the wireless network.
How can I provide some services, but no internet access to untrusted hosts, yet still allow trusted clients on wireless to access the internet (clearly I cant simply firewall off the access point)?
Thanks in advance,
Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · Patrick Coleman
How can I provide some services, but no internet access to untrusted hosts, yet still allow trusted clients on wireless to access the internet (clearly I cant simply firewall off the access point)?
Thanks in advance,
Patrick
Why not? That's exactly what I do at work.
The work setup is a linux box with 2 NICs; eth0 internal NW and eth1 external. DNAT. The firewall script reads /etc/firewall/ACL which contains the IPs of the machines allowed internet access. More specifically, ACL contains:
192.168.1.4;tcp;1024:65535;-m mport --dports;20:23,25,80,110,113,119,123,143,443,873 192.168.1.4;udp;123;--dport;123 192.168.1.4;tcp;1024:65535;--dport;1024:65535 192.168.1.4;udp;1024:65535;--dport;1024:65535
Note that I chose semicolon as a delimiter because it was the first thing I thought of that would work. I have as many of those 4-line entries as there are allowed computers. Most have a much more limited first line --dport list than I show here because they don't need all those services.
Then the applicable part of the iptables script:
# Access control:
if [ -f /etc/firewall/ACL ]; then
while read FWD ; do
IP=`echo "$FWD" | cut -d ';' -f 1`
PROTO=`echo "$FWD" | cut -d ';' -f 2`
SPORT=`echo "$FWD" | cut -d ';' -f 3`
PLURAL=`echo "$FWD" | cut -d ';' -f 4` # either "--dport" or "-m
mport --dports"
DPORT=`echo "$FWD" | cut -d ';' -f 5 | cut -d '#' -f 1`
iptables -A FORWARD -i $IFI -o $IFE -s $IP -p $PROTO --sport $SPORT$PLURAL $DPORT -j ACCEPT
done </etc/firewall/ACL
fi
iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
The DPORT line allows "inline" comments at the end of any line. $IFE and $IFI should be self explanatory. Everything on the FORWARD chain that is not specifically allowed is denied (DROPped).
HTH
gypsy
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/