CD-ripping using ioctl() does not work when DMA is disabled (ide-cd)
In kernel 2.6.8, my old TEAC CD-532E-A CD-ROM is blacklisted and DMA is automatically disabled. When I try to rip an audio CD using cdparanoia, all I get is a silent wav file full of zeroes. I know that there was some discussions about this on the list during the summer in conjunction with the "dropping to single frame DMA" issue, but I think I have some new information to add...
I investigated the cdparanoia source a bit and was able to pinpoint the problem a bit more. cdparanoia uses the ioctl() interface with CDROMREADAUDIO to read data from the CD and normally tries to read 6 or 8 frames at a time. The problem is that only the first read frame contains valid data, the others are blank and only contain zeroes. If I disable error correction and only read one frame at a time ("cdparanoia -n1 -Z") it seems to work fine. If I defy the blacklist and turn DMA on using "hdparm -d1", cdparanoia can read multiple frames without any problems.
So in conclusion, this seems to be a problem that only occurs when reading multiple frames using ioctl() with DMA off. I hope that this will help find and fix the problem.
/Johan
Quoted 3 lines · Johan Billing
So in conclusion, this seems to be a problem that only occurs when reading multiple frames using
ioctl()with DMA off. I hope that this will help find and fix the problem.
The simple fix, of course, is to not use cooked ioctl mode :)
This seems like a good time to mention that I've got a version modified to use SG_IO, which can be found at
http://people.redhat.com/pjones/cdparanoia/ . It still needs plenty of testing before I merge any of that code in the main tree, though.
(Sorry about the double-reply, Johan, but I didn't want to leave you off of the copy to l-k, even after I messed up on the first one)