Skip to contentSkip to conversation

Autofs and unrecognized parameters... mount() not ignoring anymorefor 2.6 kernel?

DISCUSSION Hans Deragon 2 participants 2 messages Sep 3, 2004 Kernel automounter

lore
Share & tools
lore
#0 lore raw

Greetings.

I use the same source code for two systems, RHL 9 and FC2. Its Autofs
4.1.3 with my infamous backfstype patch.

RHL 9 runs kernel 2.4.20-28.9 while FC2 runs 2.6.6-1.435. On RHL 9, autofs
runs nicely. On FC2, it complains about unrecognized parameters. This happens when I try to mount from yp maps that are meant for Solaris.

Is this a known issue? Seams that the mount function does not ignore
unrecognized parameters anymore under the 2.6 kernel.

Currently, my quick fix is to change /etc/init.d/autofs to catch the
unrecognized parameters. These are "quota" and "nobrowse".

Best regards,
Hans Deragon
--
Consultant en informatique/Software Consultant

Deragon Informatique inc.     Open source:
http://www.deragon.biz        http://facil.qc.ca (Promotion du libre)
mailto://[email protected]     http://autopoweroff.sourceforge.net (Logiciel)
#1 lore raw

==> Regarding [autofs] Autofs and unrecognized parameters... mount() not ignoring anymorefor 2.6 kernel?; Hans Deragon <[email protected]> adds:

hans> Greetings. I use the same source code for two systems, RHL 9 and hans> FC2. Its Autofs 4.1.3 with my infamous backfstype patch.

hans> RHL 9 runs kernel 2.4.20-28.9 while FC2 runs 2.6.6-1.435. On RHL
hans> 9, autofs runs nicely. On FC2, it complains about unrecognized hans> parameters. This happens when I try to mount from yp maps that are hans> meant for Solaris.

hans> Is this a known issue? Seams that the mount function does not
hans> ignore unrecognized parameters anymore under the 2.6 kernel.

Yes, known issue. Upgrade util-linux.

-Jeff