keylargo PCI USB controller nor enabled on G4 xserve
Hello everyone,
I've been searching through the mailing-list archive but haven't seen a similar problem report yet, so I'm asking this here.
We have two G4 dual 1GHz xserves here, they are running 2.4.25-ben1 and working fine, including USB. In the process of upgrading to 2.6 I had to realize the USB KeyLargo hardware isn't detected.
lspci on 2.4 says:
======================================================================
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP 0000:00:10.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
0000:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI 0000:10:0d.0 PCI bridge: Intel Corp. 21154 PCI-to-PCI Bridge 0000:10:11.0 PCI bridge: Intel Corp. 21154 PCI-to-PCI Bridge 0000:10:15.0 RAID bus controller: Promise Technology, Inc. PDC20270 (FastTrak100 LP/TX2/TX4) (rev 02)
0000:10:1b.0 RAID bus controller: Promise Technology, Inc. PDC20270 (FastTrak100 LP/TX2/TX4) (rev 02)
0000:11:07.0 ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)
0000:11:08.0 USB Controller: Apple Computer Inc. KeyLargo USB <----
0000:11:09.0 USB Controller: Apple Computer Inc. KeyLargo USB <----
0000:12:02.0 Ethernet controller: Apple Computer Inc. Tigon3 Gigabit Ethernet NIC (BCM5701) (rev 15)
0000:12:03.0 Ethernet controller: National Semiconductor Corporation DP83820 10/100/1000 Ethernet Controller
0000:22:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI 0000:22:0d.0 ff00: Apple Computer Inc. UniNorth 2 ATA/100 0000:22:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 01)
0000:22:0f.0 ffff: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev ff)
=====================================================================
while on 2.6.6:
=====================================================================
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP 0000:00:10.0 Ethernet controller: National Semiconductor Corporation DP83820 10/100/1000 Ethernet Controller
0001:01:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI 0001:01:0d.0 PCI bridge: Intel Corp. 21154 PCI-to-PCI Bridge 0001:01:11.0 PCI bridge: Intel Corp. 21154 PCI-to-PCI Bridge 0001:01:15.0 RAID bus controller: Promise Technology, Inc. PDC20270 (FastTrak100 LP/TX2/TX4) (rev 02)
0001:01:1b.0 RAID bus controller: Promise Technology, Inc. PDC20270 (FastTrak100 LP/TX2/TX4) (rev 02)
0001:02:02.0 ffff: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (rev ff)
0001:02:03.0 ffff: Apple Computer Inc. Tigon3 Gigabit Ethernet NIC (BCM5701) (rev ff)
0001:03:02.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
0001:03:03.0 Ethernet controller: Apple Computer Inc. Tigon3 Gigabit Ethernet NIC (BCM5701) (rev 15)
0002:04:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI 0002:04:0d.0 ff00: Apple Computer Inc. UniNorth 2 ATA/100 0002:04:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 01)
0002:04:0f.0 ffff: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev ff)
======================================================================
looks to me like a pci problem as the device obviously isn't even enumerated. I tried several 2.6 versions, none of them fixed this.
Has anyone had similar problems or even a solution to this? Any help is welcome.
Thomas Unger
Quoted 5 lines · Thomas Unger
looks to me like a pci problem as the device obviously isn't even enumerated. I tried several 2.6 versions, none of them fixed this.
Has anyone had similar problems or even a solution to this? Any help is welcome.
There's something wrong with PCI enumeration on the Xserve G4 in 2.6, though I haven't yet figured out what exactly. Ideally, I would need to have physical access to one of these to fix it ... anybody in .au ?
Ben.
Can you try that workaround (quite ugly until I figure out what's really going on in there) and let me know if it makes any difference ?
===== arch/ppc/kernel/pci.c 1.43 vs edited =====
arch/ppc/kernel/pci.c +2 -1
@@ -33,6 +33,7 @@unsigned long isa_io_base =0 ;unsigned long isa_mem_base =0 ;unsigned long pci_dram_offset =0 ; +int pcibios_assign_bus_offset =1 ;void pcibios_make_OF_bus_map (void );
@@ -1263,7 +1264,7 @@ bus =pci_scan_bus (hose->first_busno, hose->ops, hose); hose->last_busno = bus->subordinate;if (pci_assign_all_busses || next_busno <= hose->last_busno) - next_busno = hose->last_busno+1 ; + next_busno = hose->last_busno + pcibios_assign_bus_offset; } pci_bus_count = next_busno;
===== arch/ppc/platforms/pmac_pci.c 1.22 vs edited =====
arch/ppc/platforms/pmac_pci.c +9 -0
@@ -50,6 +50,7 @@#endif /* CONFIG_POWER4 */ extern u8 pci_cache_line_size; +extern int pcibios_assign_bus_offset;struct pci_dev *k2_skiplist[2 ];
@@ -565,6 +566,14 @@init_p2pbridge ();fixup_nec_usb2 (); + +/* We are still having some issues with the Xserve G4, enabling +* some offset between bus number and domains for now when we +* assign all busses should help for now +*/ +if (pci_assign_all_busses) + pcibios_assign_bus_offset =0x10 ; +#ifdef CONFIG_POWER4 /* There is something wrong with DMA on U3/HT. I haven't figured out * the details yet, but if I set the cache line size to 128 bytes like
Hi,
Quoted 4 lines · Benjamin Herrenschmidt
Can you try that workaround (quite ugly until I figure out what's really going on in there) and let me know if it makes any difference ? .
thank you!
your patches works indeed, no more duplicate entries and USB works fine, too. here comes the current pci list:
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP 0000:00:10.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI 0001:10:0d.0 PCI bridge: Intel Corp. 21154 PCI-to-PCI Bridge 0001:10:11.0 PCI bridge: Intel Corp. 21154 PCI-to-PCI Bridge 0001:10:15.0 RAID bus controller: Promise Technology, Inc. PDC20270 (FastTrak100 LP/TX2/TX4) (rev 02)
0001:10:1b.0 RAID bus controller: Promise Technology, Inc. PDC20270 (FastTrak100 LP/TX2/TX4) (rev 02)
0001:11:07.0 ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03) 0001:11:08.0 USB Controller: Apple Computer Inc. KeyLargo USB 0001:11:09.0 USB Controller: Apple Computer Inc. KeyLargo USB 0001:12:02.0 Ethernet controller: Apple Computer Inc. Tigon3 Gigabit Ethernet NIC (BCM5701) (rev 15)
0001:12:03.0 Ethernet controller: National Semiconductor Corporation DP83820 10/100/1000 Ethernet Controller
0002:22:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI 0002:22:0d.0 ff00: Apple Computer Inc. UniNorth 2 ATA/100 0002:22:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 01)
0002:22:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM)
Greetings,
Thomas Unger