Skip to contentSkip to conversation

PCI VGA card info

DISCUSSION Keath Milligan 5 participants 9 messages Sep 16, 2004 – Sep 17, 2004 MIPS

lore
Share & tools
lore
#0 lore raw

Does anyone have (recent) links or info on getting standard VGA cards to work with Linux/MIPS?

I'm working with an Alchemy DBAu1550 eval board and I'd like to get VGA going on it somehow. The only 3.3V PCI card I have been able to find is an old NVidia Riva. As I understand it, some VGA cards rely on the PC BIOS to be initialized, but there was some work being done to emulate that. All of the links I've found so far on this list and other places no longer work.

Thanks

Signature · 3 lines
Keath Milligan
Austin, Texas
http://keathmilligan.net - News, Tech, Politics, Software
#1 lore raw
Quoted 1 line · Keath Milligan

Does anyone have (recent) links or info on getting standard VGA cards to work with Linux/MIPS?

The AMD/Alchemy folks have a Silicon Motion video adapter that will work in that board. I've done the framebuffer, X-Windows runs on it. The standard video cards are nearly impossible to use in any kind of embedded environment. Nothing PCI is available anymore, and even if you are able to find a way to initialize the controllers, they are obsolete before you get any product ready for manufacturing.

	-- Dan
#2 lore raw
Quoted 6 lines · Dan Malek

The AMD/Alchemy folks have a Silicon Motion video adapter that will work in that board. I've done the framebuffer, X-Windows runs on it. The standard video cards are nearly impossible to use in any kind of embedded environment. Nothing PCI is available anymore, and even if you are able to find a way to initialize the controllers, they are obsolete before you get any product ready for manufacturing.

I have this card but it doesn't seem to work with a 2.6 kernel. I'm trying to just get a console visible on it at this point, but the card doesn't seem to be getting turned on.

Signature · 3 lines
Keath Milligan
Austin, Texas
http://keathmilligan.net - News, Tech, Politics, Software
#3 lore raw
Quoted 6 lines

I have this card but it doesn't seem to work with a 2.6 kernel. I'm trying to just get a console visible

on it at this point, but the card doesn't seem to
be getting turned on.

Did you apply the 36 bit patch from my directory? 2.6 does not yet have the 36bit address support integrated in the tree. However, the patch in my directory is not complete yet so ioremap would work, but io_remap_page_range which is what the vga driver would call would not work. I have a complete patch that we're reviewing some more before I send it to Ralf. Note that without the 36 bit support, none of the pci cards will work.

Pete

#4 lore raw
In reply to Keath Milligan
Quoted 1 line · Keath Milligan

I have this card but it doesn't seem to work with a 2.6 kernel. I'm trying to just get a console visible on it at this point, but the card doesn't seem to be getting turned on.

Well, I've been told I'm good at turning things on :-) Yes, it's on my list of things to update for 2.6, just haven't gotten there yet.

	-- Dan
#5 lore raw
In reply to Dan Malek

I have running an Millennium G450 with an TX4937 processor. This PCI card is running frame buffer and X-Windows. Currently I use the card with Debian (unstable). The card I have purchased for ?99,-- and can be obtained from several distributors, for example: www.alternate.de

--
Ralf

Quoted 18 lines · Keath Milligan
Quoted 3 lines

Does anyone have (recent) links or info on getting standard VGA cards to work with Linux/MIPS?

The AMD/Alchemy folks have a Silicon Motion video adapter that will work in that board. I've done the framebuffer, X-Windows runs on it. The standard video cards are nearly impossible to use in any kind of embedded environment. Nothing PCI is available anymore, and even if you are able to find a way to initialize the controllers, they are obsolete
before you get any product ready for manufacturing.

	-- Dan
#6 lore raw
In reply to Dan Malek
Quoted 7 lines · In message <[email protected]> you wrote:

The AMD/Alchemy folks have a Silicon Motion video adapter that will work in that board. I've done the framebuffer, X-Windows runs on it. The standard video cards are nearly impossible to use in any kind of embedded environment. Nothing PCI is available anymore, and even if you are able to find a way to initialize the controllers, they are obsolete

The Fujitsu Coral-P is running fine on MIPS systems, for example on the XXS3HC Device, see
http://www.mycable.de/productsshow.php?content=products&lang=en&topic=xxs3hc

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: [email protected]
Shakespeare's Law of Prototyping: (Hamlet III, iv, 156-160)
        O, throw away the worser part of it,
        And live the purer with the other half.
#8 lore raw
Quoted 6 lines · In message <[email protected]> you wrote:
Quoted 4 lines

The Fujitsu Coral-P is running fine on MIPS systems, for example on the XXS3HC Device, see
http://www.mycable.de/productsshow.php?content=products&lang=en&topic=xxs3hc

V2.4 kernel though, I'm pretty sure.

Indeed.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: [email protected]
"Love your country but never trust its government."
- from a hand-painted road sign in central Pennsylvania