lsscsi-0.14 released

lsscsi is a utility that uses sysfs in linux 2.6 series kernels to list information about all SCSI devices and SCSI hosts. Both a compact format (default) which is one line
per device and a "classic" format (like the output of 'cat /proc/scsi/scsi') are supported. Some examples:

$ lsscsi
[0:0:0:0]    disk    Linux    scsi_debug       0004  /dev/sda
[1:0:6:0]    tape    SONY     SDT-7000         0192  /dev/st0

$ lsscsi --classic
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: Linux    Model: scsi_debug       Rev: 0004
  Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 06 Lun: 00
  Vendor: SONY     Model: SDT-7000         Rev: 0192
  Type:   Sequential-Access                ANSI SCSI revision: 02

Version 0.14 is available at
http://www.torque.net/scsi/lsscsi.html
It depends on the recently released libsysfs v1.2.0 see:
http://linux-diag.sourceforge.net

lsscsi v0.14 has been tested with lk 2.6.9-rc2 .

Version 0.14 2004/9/20
- port to depend on sysfutils-1.2.0 or later. Needs dlist_sort_custom().
- remove 'sysfsroot' command line option

Doug Gilbert