Skip to contentSkip to conversation

Libata - sata_sil - error

DISCUSSION Fabian Fenaut 2 participants 2 messages Sep 24, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

I was writing to my sata drive, and I've just had this :

Sep 24 14:26:58 odie kernel: scsi1: ERROR on channel 0, id 0, lun 0, CDB: Read (10) 00 03 14 ca a7 00 00 08 00
Sep 24 14:26:58 odie kernel: Current sda: sense key Medium Error
Sep 24 14:26:58 odie kernel: Additional sense: Unrecovered read error - auto reallocate failed
Sep 24 14:26:58 odie kernel: end_request: I/O error, dev sda, sector 51694247
Sep 24 14:26:58 odie kernel: ATA: abnormal status 0x58 on port 0xE080E087
Sep 24 14:26:58 odie last message repeated 2 times

uname -r = 2.6.7-mm7-ff

Drive : Vendor: ATA Model: ST3120026AS Rev: 3.05

Full dmesg : http://fabian.fenaut.free.fr/linux/dmesg-2.6.7-mm7-ff
.config : http://fabian.fenaut.free.fr/linux/config-2.6.7-mm7-ff

Since 7 sept, I had "EXT3-fs warning: mounting fs with errors, running e2fsck is recommended" when mounting this drive. So I tried to fsck, but it hangs and nothing happened.

Please help :)

Fabian

#1 lore raw
Quoted 3 lines · Fabian Fenaut

Since 7 sept, I had "EXT3-fs warning: mounting fs with errors, running e2fsck is recommended" when mounting this drive. So I tried to fsck, but it hangs and nothing happened.

2.6.7 doesn't have code to generate proper SATA error diagnostic reports. 2.6.9rc2 will dump the ATA error state which will reveal a lot more.