Tos, Mark and tunnels
I was thinking on a set-up involving Filtering, Traffic Shaping and Tunnels.
This trough up a couple of questions that I hope someone can give a definitive answer to.
If some or all of my traffic is tunnelled I see a potential problem when trying to shape traffic leaving the network.
As far as I can see with ESP packets Route2 filters can only differentiate on the destination IP as they can not see the encrypted traffic.
I have seen a reference to the 2.6 kernels IPsec implementation that implying that if you use a netfilter rule to set a mark on the incoming packets before they enter the tunnel, that the mark is replicated to the ESP Packets created.
Is this correct?
If so it would allow shaping providing the shaping is done on the same box
as the tunnelling.
Does the TOS field also get replicated?
This would allow for TOS based traffic shaping on a downstream box.
Are the tos field or Marks replicated to the ESP packets for freeswan/openswan and the 2.4 Kernel.
Are the IP headers TOS value, or netfilter Marks replicated to the new packet for the other tunnel protocols, IPIP, GRE, and so on.
while on the subject of MARKs and TOS values.
Is there any way of setting a MARK or the TOS on ftp data connections that
match as related using the ip_conntrack_ftp module?
Without setting the same mark on packets relating to other connections?
Signature · 4 lines
J. David Rye http://www.roadrunner.uk.com http://www.rha.org.uk mailto://[email protected]
Quoted 12 lines · David Rye of Roadtech
I was thinking on a set-up involving Filtering, Traffic Shaping and Tunnels.
This trough up a couple of questions that I hope someone can give a definitive answer to.
If some or all of my traffic is tunnelled I see a potential problem when trying to shape traffic leaving the network.
As far as I can see with ESP packets Route2 filters can only differentiate on the destination IP as they can not see the encrypted traffic.
Quoted 6 lines
I have seen a reference to the 2.6 kernels IPsec implementation that implying that if you use a netfilter rule to set a mark on the incoming packets before they enter the tunnel, that the mark is replicated to the ESP Packets created.
Is this correct?
yes. marks follow packets through the stack regardless what other processing takes place on the packet. a packet MARK-ed in PREROUTING will still have that mark in place in POSTROUTING and every point between.
Quoted 5 lines
If so it would allow shaping providing the shaping is done on the same box
as the tunnelling.Does the TOS field also get replicated?
i do not believe so. however, you can use a combination of MARK-ing and matching on "-m tos --tos X" and the resetting the TOS on the encrypted/decrypted packet based on the mark with "-j TOS --set-tos"
Quoted 8 lines
This would allow for TOS based traffic shaping on a downstream box.
Are the tos field or Marks replicated to the ESP packets for freeswan/openswan and the 2.4 Kernel.
Are the IP headers TOS value, or netfilter Marks replicated to the new packet for the other tunnel protocols, IPIP, GRE, and so on.
Quoted 6 lines
while on the subject of MARKs and TOS values.
Is there any way of setting a MARK or the TOS on ftp data connections that
match as related using theip_conntrack_ftpmodule?
Without setting the same mark on packets relating to other connections?
iptables [...] -m helper --helper ftp [...]
-j
Signature · 1 line
Jason Opperisano <[email protected]>
Quoted 2 lines · David Rye of Roadtech
Are the tos field or Marks replicated to the ESP packets for freeswan/openswan and the 2.4 Kernel.
clicked 'send' too soon... for this piece, you can use "hidetos=no" in the "config-setup" of your free/openswan config.
check out http://wiki.openswan.org/index.php/FAQ for more details.
-j
Signature · 1 line
Jason Opperisano <[email protected]>