Excess Bandwidth
Hi,
I'm trying to configure QoS on my linux in the following manner:
I have a main link with 64K, so I divided it in 3 classes of 18K, 14K
and 9K with an excess (not used for classified traffic, just to be shared) of 23K. This excess should be distributed proportonally among the 3 classes, that is, the class that has more rate should borrow more bandwidth. What is happening is just the opposite, the class that has less rate is borrowing more bandwidth. A representation of my "hierarchical class layout" is as follow:
root - 64K
A - 18K B - 14K C - 9K
I have read some documentation that says it should work exactly in
this in way, but it is not happening in my environment. All the tests I did show me that the class with less rate is borrow more bandwidth.
Can anyone help me?
Signature · 14 lines
______________________________ Ronaldo Z. Afonso Projetista de Software Jr. Cyclades Brasil [email protected] Phone: 55 11 5033-3361 Fax: 55 11 5033-3388 www.cyclades.com.br "Everywhere with Linux" _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hej Ronaldo
Remember to prioritize the excess bandwidth. If you are using the HTB read the bottom section of the manual.:
http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm#prio
The "prio" parameter will help you with your problem, give the child classes a priority from 1-3, where 1 is the highest priority and 3 is the lowest.
Quoted 11 lines · Ronaldo Z. Afonso
Hi,
I'm trying to configure QoS on my linux in the following manner:
I have a main link with 64K, so I divided it in 3 classes of 18K, 14K
and 9K with an excess (not used for classified traffic, just to be shared) of 23K. This excess should be distributed proportonally among the 3 classes, that is, the class that has more rate should borrow more bandwidth. What is happening is just the opposite, the class that has less rate is borrowing more bandwidth. A representation of my "hierarchical class layout" is as follow:
Quoted 8 lines
root - 64K
A - 18K B - 14K C - 9K
I have read some documentation that says it should work exactly in
this in way, but it is not happening in my environment. All the tests I did show me that the class with less rate is borrow more bandwidth.
Can anyone help me?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Sorry for my insistence, but I have tried to use different "prios"
based on the class rate and what happens is that the class that has more rate, and in this case more priority, will borrow almost all the excess bandwidth.
Like I said, I have read that htb share its excess bandwidth
proportionaly to the class rates its childrens are assigned.
I made a test and based on the statistics of "tc ouput" we can see
that the class that has more rate "borrowed" less of the excess bandwidth.
Another question is what is the meaning of "lended" in htb? To me it
is a little bit confusing.
[root@teste_hsbc htb]# tc -s -d class show dev pvc0
class htb 1:2 root rate 512Kbit ceil 512Kbit burst 2254b/8 mpu 0b cburst 2254b/8 mpu 0b level 7
Sent 7543402 bytes 5031 pkts (dropped 0, overlimits 0)
rate 37748bps 25pps
lended: 2112 borrowed: 0 giants: 0
tokens: 27488 ctokens: 27488
class htb 1:3 parent 1:2 leaf 3: prio 1 quantum 1000 rate 50Kbit ceil 512Kbit burst 1664b/8 mpu 0b cburst 2254b/8 mpu 0b level 0 Sent 2068254 bytes 1377 pkts (dropped 2988, overlimits 0) rate 11268bps 7pps
lended: 493 borrowed: 884 giants: 0
tokens: -326656 ctokens: 9488
class htb 1:4 parent 1:2 leaf 4: prio 1 quantum 1280 rate 100Kbit ceil 512Kbit burst 1728b/8 mpu 0b cburst 2254b/8 mpu 0b level 0 Sent 2588080 bytes 1728 pkts (dropped 2644, overlimits 0) rate 11335bps 7pps
lended: 980 borrowed: 748 giants: 0
tokens: 73728 ctokens: 20988
class htb 1:5 parent 1:2 leaf 5: prio 1 quantum 1920 rate 150Kbit ceil 512Kbit burst 1791b/8 mpu 0b cburst 2254b/8 mpu 0b level 0 Sent 2887068 bytes 1926 pkts (dropped 2447, overlimits 0) rate 11696bps 7pps
lended: 1446 borrowed: 480 giants: 0
tokens: 74070 ctokens: 27488
Quoted 40 lines · Daniel Frederiksen
Hej Ronaldo
Remember to prioritize the excess bandwidth. If you are using the HTB read the bottom section of the manual.:
http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm#prioThe "prio" parameter will help you with your problem, give the child classes a priority from 1-3, where 1 is the highest priority and 3 is the lowest.
Quoted 11 lines · Ronaldo Z. Afonso
Hi,
I'm trying to configure QoS on my linux in the following manner:
I have a main link with 64K, so I divided it in 3 classes of 18K, 14K
and 9K with an excess (not used for classified traffic, just to be shared) of 23K. This excess should be distributed proportonally among the 3 classes, that is, the class that has more rate should borrow more bandwidth. What is happening is just the opposite, the class that has less rate is borrowing more bandwidth. A representation of my "hierarchical class layout" is as follow:Quoted 10 lines
root - 64K
A - 18K B - 14K C - 9K
I have read some documentation that says it should work exactly in
this in way, but it is not happening in my environment. All the tests I did show me that the class with less rate is borrow more bandwidth.
Can anyone help me?_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 14 lines
______________________________ Ronaldo Z. Afonso Projetista de Software Jr. Cyclades Brasil [email protected] Phone: 55 11 5033-3361 Fax: 55 11 5033-3388 www.cyclades.com.br "Everywhere with Linux" _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/