cbq.init - Some strange behavior / small question
Hi,
I've a small question about the cbq.init script. For a gateway I want to shape connections from special IP addresses to limit their bandwith.
In my test environment I've too machines. One testclient with the IP 192.168.1.19. On my "shaper" (192.168.1.251) runs cbq.init with following config file:
orthanc:/etc/sysconfig/cbq# cat cbq-4.ws-019 DEVICE=eth0,100Mbit,10Mbit RATEKbit WEIGHT=1Kbit PRIO=5 LEAF=tbf ISOLATED=yes BOUNDED=yes RULE2.168.1.19/32
When I have a single scp upload to the server my bandwith is limited to 10Kbit/s.
But when I have serveral uploads (I've had five in my test) I have an overall bandwith
of 20.1Kbit/s.
How can I say my class to limit the overall traffic to max 10Kbit/s?
Thanks in advance
Greets
Christoph
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/