Patch for Creative WebCam Go mini
Hi,
I have Creative WebCam Go mini.
(http://www.qbik.ch/usb/devices/showdev.php?id=2868)
This camera has inside STV0680B chip and I have modified one of the kernel drivers (drivers/usb/media/stv680)
So I have made this camera supported.
Here are the patches for files stv680.h and stv680.c
//----------------------------------------------------------
stv680.h 2004-09-26 20:50:40.000000000 +0300 renamed from stv680.h.orig.2.6.8 2004-09-26 20:31:23.000000000 +0300 +6 -0
@@ -39,14 +39,20 @@ /* number of decoding errors before kicking the camera */ #define STV680_MAX_ERRORS 100 + #define USB_PENCAM_VENDOR_ID 0x0553 #define USB_PENCAM_PRODUCT_ID 0x0202 + +#define USB_CREATIVEGOMINI_VENDOR_ID 0x041e +#define USB_CREATIVEGOMINI_PRODUCT_ID 0x4007 + #define PENCAM_TIMEOUT 1000 /* fmt 4 */ #define STV_VIDEO_PALETTE VIDEO_PALETTE_RGB24 static struct usb_device_id device_table[] = { {USB_DEVICE (USB_PENCAM_VENDOR_ID, USB_PENCAM_PRODUCT_ID)}, + {USB_DEVICE (USB_CREATIVEGOMINI_VENDOR_ID,
USB_CREATIVEGOMINI_PRODUCT_ID)},
{} };
MODULE_DEVICE_TABLE (usb, device_table);
//----------------------------------------------------------
stv680.c 2004-09-26 20:42:34.000000000 +0300 renamed from stv680.c.orig.2.6.8 2004-09-26 20:34:00.000000000 +0300 +10 -0
@@ -1,4 +1,7 @@ /* + * Creative WebCam Go Mini Driver, modified by Kiril Jovchev + * ([email protected]) + * * STV0680 USB Camera Driver, by Kevin Sisson ([email protected]) * * Thanks to STMicroelectronics for information on the usb commands, and
@@ -56,6 +59,13 @@ * to set to a non-supported size. This allowed * gnomemeeting to work. * Fixed proc entry removal bug. + * + * ver 0.26 Sep, 2004 (kjv) + * Added support for Creative WebCam Go mini. + * Camera is based on same chip. + * + * + * */ #include <linux/config.h>
@@ -1395,9 +1405,12 @@ if ((dev->descriptor.idVendor == USB_PENCAM_VENDOR_ID) &&
(dev->descriptor.idProduct == USB_PENCAM_PRODUCT_ID)) {
camera_name = "STV0680";
PDEBUG (0, "STV(i): STV0680 camera found.");+ } else if ((dev->descriptor.idVendor ==USB_CREATIVEGOMINI_VENDOR_ID) && (dev->descriptor.idProduct == USB_CREATIVEGOMINI_PRODUCT_ID)) {
+ camera_name = "Creative WebCam Go Mini";
+ PDEBUG (0, "STV(i): Creative WebCam Go Mini found.");
} else {- PDEBUG (0, "STV(e): Vendor/Product ID do not match
STV0680 values.");
- PDEBUG (0, "STV(e): Check that the STV0680 camera is
connected to the computer.");
+ PDEBUG (0, "STV(e): Vendor/Product ID do not match
STV0680 or Creative WebCam Go Mini values.");
+ PDEBUG (0, "STV(e): Check that the STV0680 or Creative
WebCam Go Mini camera is connected to the computer.");
retval = -ENODEV;
goto error;
}//----------------------------------------------------------
Best Regards
Kiril Jovchev