Skip to contentSkip to conversation

up and down shaping based on IP

LARTC Hariett Jones 1 participant 1 message Oct 20, 2004

lore
Share & tools
lore
#0 lore raw

Hello, i have a server (486sx and 16ram). It gives me this error :
NETDEVICE WATCHDOG eth1 : ...timeout.
I checked in many places for solutions. Even wrote to this mailinglist. But lately i recived information, that too much upload
may mix my adsl modem up. So..... my question is how should my script look while the situation is :
eth0 - connected to adsl modem and thus to internet
eth1 - connected to 16port switch which supplies internet to 12 other computers.
dsl connection is 1000/256 kbit/s

Please correct my script to include upload control. Every host should have equal speed.

Quoted 44 lines
bernard@gecon:~$ cat /etc/rc.d/rc.htb
#!/bin/sh
CLIENTS="01 05 07 11 12 13 15 18 19 20 21 22"
htb_start() {
  echo "tc qdisc add dev eth1 root handle 1: htb default 12"
  tc qdisc add dev eth1 root handle 1: htb default 12
  echo "tc qdisc add dev eth0 root handle 2: tbf rate 200kbit latency 
50ms burst  1540"
  tc qdisc add dev eth0 root handle 2: tbf rate 230kbit latency 50ms 
burst 1540
  echo "tc class add dev eth1 parent 1: classid 1:1 htb rate 1000kbit 
ceil 1000k bit"
  tc class add dev eth1 parent 1: classid 1:1 htb rate 1000kbit ceil 
1000kbit

echo "Ustawianie klas"

for IP in $CLIENTS; do

    tc class add dev eth1 parent 1:1 classid 1:1${IP} htb rate 80kbit 

ceil 1000k bit cburst 1kbit
done

#dla nie zakwalifikowanych
tc class add dev eth1 parent 1:1 classid 1:100 htb rate 50kbit ceil
50kbit qua ntum 4

echo "Ustawianie filtrów i SFQ"

for IP in $CLIENTS; do
tc filter add dev eth1 protocol ip parent 1: prio 2 u32 match ip
dst 192.168 .0.1${IP} flowid 1:1${IP}

    tc qdisc add dev eth1 parent 1:1${IP} handle 1${IP}:0 sfq perturb 10

done
tc filter add dev eth1 protocol ip parent 1: prio 3 u32 match ip dst
192.168.0 .0/24 flowid 1:100
}

htb_stop() {
echo "tc qdisc del dev eth1 root"
tc qdisc del dev eth1 root
echo "tc qdisc del dev eth0 root"
tc qdisc del dev eth0 root
}

Quoted 13 lines

case "$1" in
'start')
htb_start
;;
'stop')
htb_stop
;;
'restart')
htb_stop
htb_start
;;
*)
echo "usage $0 start|stop|restart"

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/