ath10k: 160MHz/80+80 radar detect with Wave2 cards
Hi,
as we know, some wave2 cards support 160MHz (with some limitations). This also requires support for radar detection with 160MHz/80+80 or otherwise cfg80211 will reject this setting. I would like to propose following change but I am unsure whether it actually works correctly on this hardware (QCA9888).
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 2bea5e8..3b43759 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7951,7 +7951,9 @@ static const struct ieee80211_iface_combination ath10k_10_4_if_comb[] = {
.radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
BIT(NL80211_CHAN_WIDTH_20) |
BIT(NL80211_CHAN_WIDTH_40) |
- BIT(NL80211_CHAN_WIDTH_80),
+ BIT(NL80211_CHAN_WIDTH_80) |
+ BIT(NL80211_CHAN_WIDTH_80P80) |
+ BIT(NL80211_CHAN_WIDTH_160)
#endif
},
};Does anyone know whether radar detection is supported for these channel widths?
Kind regards,
Sven
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k