Skip to contentSkip to conversation

set blksize of block device

DISCUSSION Lei Yang 4 participants 10 messages Oct 27, 2004 – Oct 28, 2004

lore
Share & tools
lore

Lei Yang

author
#0 lore raw

Hello,

I am learning block device drivers and have a newbie question. Given a block device, is there anyway that I could set its block size? For example, I want to write a block device driver that will work on an existing block device. In this driver, I want block size smaller. (The idea looks confusing but I could explain if anybody is interested :- ) However, typically the block size is 1KB, now I want to set it to 512 or 256. Can I do it?

TIA
Lei

author
#1 lore raw

Please cc me if you have answers to this, I am not on the list. Thanks a lot!

Quoted 7 lines · Lei Yang

Hello,

I am learning block device drivers and have a newbie question. Given a block device, is there anyway that I could set its block size? For example, I want to write a block device driver that will work on an existing block device. In this driver, I want block size smaller. (The idea looks confusing but I could explain if anybody is interested :- ) However, typically the block size is 1KB, now I want to set it to 512 or 256. Can I do it?

TIA
Lei

author
#2 lore raw

If nobody could answer this question, what about another one? Is there a system call or a kernel interface that would allow me to write a block of data to block 1 of a certain block device?

Thanks for your reply in advance!

Lei

Quoted 14 lines · Lei Yang

Please cc me if you have answers to this, I am not on the list. Thanks a lot!

Quoted 7 lines · Lei Yang

Hello,

I am learning block device drivers and have a newbie question. Given a block device, is there anyway that I could set its block size? For example, I want to write a block device driver that will work on an existing block device. In this driver, I want block size smaller. (The idea looks confusing but I could explain if anybody is interested :- ) However, typically the block size is 1KB, now I want to set it to 512 or 256. Can I do it?

TIA
Lei

author
#3 lore raw

Or in other words, is there generic routines for block devices such that we could:

get (set) block size of a block device;
read an existing block (e.g. block 4);
write an existing block (e.g. block 5);

Please help!!!!

TIA
Lei

Quoted 31 lines · Lei Yang

If nobody could answer this question, what about another one? Is there a system call or a kernel interface that would allow me to write a block of data to block 1 of a certain block device?

Thanks for your reply in advance!

Lei

Quoted 14 lines · Lei Yang

Please cc me if you have answers to this, I am not on the list. Thanks a lot!

Quoted 7 lines · Lei Yang

Hello,

I am learning block device drivers and have a newbie question. Given a block device, is there anyway that I could set its block size? For example, I want to write a block device driver that will work on an existing block device. In this driver, I want block size smaller. (The idea looks confusing but I could explain if anybody is interested :- ) However, typically the block size is 1KB, now I want to set it to 512 or 256. Can I do it?

TIA
Lei

Signature · 3 lines
Kernelnewbies: Help each other learn about the Linux kernel.
Archive:       http://mail.nl.linux.org/kernelnewbies/
FAQ:           http://kernelnewbies.org/faq/
#4 lore raw
Quoted 6 lines · Lei Yang

Or in other words, is there generic routines for block devices such that we could:

get (set) block size of a block device;
read an existing block (e.g. block 4);
write an existing block (e.g. block 5);

Can you stick to "reply below quote" style please?

Quoted 2 lines
Quoted 2 lines

If nobody could answer this question, what about another one? Is there a system call or a kernel interface that would allow me to write a

Can you use read, write and seek system calls?
--
vda

author
#5 lore raw
Quoted 5 lines · Denis Vlasenko
Quoted 2 lines · Lei Yang

Or in other words, is there generic routines for block devices such that we could:

Quoted 9 lines
Quoted 5 lines

get (set) block size of a block device;
read an existing block (e.g. block 4);
write an existing block (e.g. block 5);

Can you stick to "reply below quote" style please?

OK

Quoted 13 lines
Quoted 5 lines
Quoted 5 lines

If nobody could answer this question, what about another one? Is there a system call or a kernel interface that would allow me to write a

Can you use read, write and seek system calls?
--
vda

Not really, as I've explained, I want to do all these stuff in kernel space. More specifically, I want to write a newbie kernel module. In this module, I'll do something with a raw block device (with no filesystem). For example, I want to do block I/O operations on ramdisk, and I want to set the block size of ramdisk to whatever value I want (power of 2 of course).

Any comments?

Thanks,
Lei

#6 lore raw
Quoted 1 line · Lei Yang

Denis Vlasenko wrote:

...

Quoted 1 line
Quoted 1 line

Can you use read, write and seek system calls?

...

Quoted 1 line

Not really, as I've explained, I want to do all these stuff in kernel space. More specifically, I want to write a newbie kernel module. In this module, I'll do something with a raw block device (with no filesystem). For example, I want to do block I/O operations on ramdisk, and I want to set the block size of ramdisk to whatever value I want (power of 2 of course).

Pick up a copy of Linux Device Drivers by Rubini & Corbet (O'Reilly, 2001) and start with the example ramdisk block driver in chapter 12.

Signature · 1 line
Todd
#7 lore raw
In reply to Lei Yang
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines

I am learning block device drivers and have a newbie question. Given a block device, is there anyway that I could set its block size? For example, I want to write a block device driver that will work on an existing block device. In this driver, I want block size smaller. (The idea looks confusing but I could explain if anybody is interested :- ) However, typically the block size is 1KB, now I want to set it to 512 or 256. Can I do it?

256 - no way if hardware can do only 512-byte writes.

You need read-modify-write for this.
--
vda

#8 lore raw
In reply to Lei Yang

Firstly you cannot set the block size to lesser than 512.

When there is a request for the IO, you populate "struct req" data structure which you will pass it to the kernel or lower level SCSI/SATA driver. In the "struct req" there is a field "b_size" which may be what you are interested in. At the user level you can use the IOCTLs to set the block size of the RAW block device.

-Shesha

Quoted 38 lines · Lei Yang

If nobody could answer this question, what about another one? Is there a system call or a kernel interface that would allow me to write a block of data to block 1 of a certain block device?

Thanks for your reply in advance!

Lei

Quoted 21 lines · Lei Yang

Please cc me if you have answers to this, I am not on the list. Thanks a lot!

Quoted 13 lines · Lei Yang

Hello,

I am learning block device drivers and have a newbie question. Given a block device, is there anyway that I could set its block size? For example, I want to write a block device driver that will work on an existing block device. In this driver, I want block size smaller. (The idea looks confusing but I could explain if anybody is interested :- ) However, typically the block size is 1KB, now I want to set it to 512 or 256. Can I do it?

TIA
Lei

--

Kernelnewbies: Help each other learn about the Linux kernel.
Archive:       http://mail.nl.linux.org/kernelnewbies/
FAQ:           http://kernelnewbies.org/faq/
Signature · 5 lines
  .-----.
 /       \
{  o | o  } 
     |
    \_/
author
#9 lore raw
Quoted 11 lines · Shesha B. Sreenivasamurthy

Firstly you cannot set the block size to lesser than 512.

When there is a request for the IO, you populate "struct req" data structure which you will pass it to the kernel or lower level SCSI/SATA driver. In the "struct req" there is a field "b_size" which may be what you are interested in. At the user level you can use the IOCTLs to set the block size of the RAW block device.

-Shesha

I understand that for real block device (like hard disk), block size cannot be less than 512. But to ramdisks, I think they are truely random addressable, and should be able to move on blocks even with size of 2 bytes.

Any comments?

Quoted 38 lines · Lei Yang
Quoted 37 lines

If nobody could answer this question, what about another one? Is there a system call or a kernel interface that would allow me to write a block of data to block 1 of a certain block device?

Thanks for your reply in advance!

Lei

Quoted 18 lines · Lei Yang

Please cc me if you have answers to this, I am not on the list. Thanks a lot!

Quoted 9 lines · Lei Yang

Hello,

I am learning block device drivers and have a newbie question. Given a block device, is there anyway that I could set its block size? For example, I want to write a block device driver that will work on an existing block device. In this driver, I want block size smaller. (The idea looks confusing but I could explain if anybody is interested :- ) However, typically the block size is 1KB, now I want to set it to 512 or 256. Can I do it?

TIA
Lei

--

Kernelnewbies: Help each other learn about the Linux kernel.
Archive:       http://mail.nl.linux.org/kernelnewbies/
FAQ:           http://kernelnewbies.org/faq/