Skip to contentSkip to conversation

Filtering encrypted vs. unencrypted packages?

DISCUSSION Hadmut Danisch 3 participants 3 messages Oct 30, 2004 – Oct 31, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

I was just playing around with 2.6 IPSec and isakmpd and ran into a problem:

In order to have the packets from the peer IPSEC network accepted, I need to have an entry like

iptables -A INPUT -s 192.168.19.0/24 -j ACCEPT

where 192.168.19.0 is the network behind the ipsec peer.

But if I do this, the machine would also accept unencrypted packages from the Internet (except for the fact that packets to RFC1918-Adresses are not routed, but assume that the LAN has official addresses).

I can't even distinguish them by the interface, because from an iptables point of view, the packages are incoming on the external interface, as if they were coming unencrypted.

How do I treat packets from IPSec and unencrypted plain packets from the Internet differently with iptables?

regards
Hadmut

#1 lore raw
Quoted 9 lines · Hadmut Danisch

Hi,

I was just playing around with 2.6 IPSec and isakmpd and ran into a problem:

In order to have the packets from the peer IPSEC network accepted, I need to have an entry like

iptables -A INPUT -s 192.168.19.0/24 -j ACCEPT

Try using the the protocol option:

iptables -A INPUT -s 192.168.19.0/24 -p 50 -j ACCEPT iptables -A INPUT -s 192.168.19.0/24 -p 51 -j ACCEPT

where 50 are esp packets und 51 ah if I understood it right.

#2 lore raw
In reply to Hadmut Danisch
Quoted 16 lines · Hadmut Danisch

Hi,

I was just playing around with 2.6 IPSec and isakmpd and ran into a problem:

In order to have the packets from the peer IPSEC network accepted, I need to have an entry like

iptables -A INPUT -s 192.168.19.0/24 -j ACCEPT

where 192.168.19.0 is the network behind the ipsec peer.

But if I do this, the machine would also accept unencrypted packages from the Internet (except for the fact that packets to RFC1918-Adresses are not
routed, but assume that the LAN has official addresses).

Quoted 7 lines

I can't even distinguish them by the interface, because from an iptables point of view, the packages are incoming on the external interface,
as if they were coming unencrypted.

How do I treat packets from IPSec and unencrypted plain packets from the Internet differently with iptables?

the packets pass through the netfilter tables twice--once encrypted, and once unencrypted. the 'common' way to filter IPSec traffic with the 2.6 kernel is to mark the IPSec packets:

  # mark ipsec packets from vpn peer 1
  iptables -t mangle -A PREROUTING -p 50 -s $vpn_peer1 \
    -j MARK --set-mark 1
  # accept IKE & ESP packets from vpn peer 1
  iptables -A INPUT -i $extif -p udp -s $vpn_peer1 \
    --sport 500 --dport 500 -j ACCEPT
  iptables -A INPUT -i $extif -p 50 -s $vpn_peer1 -j ACCEPT
  # accept packets from the remote vpn net that have the mark
  iptables -A FORWARD -s $vpn_peer_net1 -m mark --mark 1 -j ACCEPT

-j

--
"That's it! You people have stood in my way long enough. I'm going to clown college!"
--The Simpsons