Multipath problem
Hi,
I'm trying to setup a HP packaged cluster (2xDL380G4 Servers +MA500G2 Storage) both Servers are connected via 2 SCSI-Links one for each of the storages's redundancy controllers.
The Storage shows as /dev/cciss/c0d1 and /dev/cciss/c1d0. When I create an multipath md device with version 1.6 of mdadm I can create it but restarting the array after I stopped it fails. With version 1.8.2 the size of the generated Array is 0 Blocks but I can restart it (which buys me nothing with that size ;-)
Mixing mdadm-1.6 and 1.8.1 for creating/managing the device doesn't work, it gives me an segfault.
Distro: Is debian woody, with a 2.4.25 debian standard kernel + patches for acl+ea and devmapper (linux-2.4.26-rc1-devmapper-ioctl.patch)
Any Ideas?
Thanks in advance,
Oliver
Version 1.60 (debian-package from adrian bunk):
server-b:~# mdadm --create /dev/md0 --level multipath -n 2 /dev/cciss/c0d1 /dev/cciss/c1d0 VERS = 9000 mdadm: array /dev/md0 started.
server-b:/usr/src/packages# cat /proc/mdstat
Personalities : [multipath]
read_ahead 1024 sectors
md0 : active multipath cciss/c1d0[0] cciss/c0d1[1]
573496704 blocks [1/1] [U]unused devices: <none>
mdadm --examine --scan --config=/etc/mdadm/mdadm.conf >> /etc/mdadm/mdadm.conf
server-b:/usr/src/packages/mdadm-1.8.1# cat /etc/mdadm/mdadm.conf DEVICE /dev/cciss/c[0-9]d[0-9] ARRAY /dev/md0 level=multipath num-devices=1 UUID=b4370fc9:9f734ab7:d6811ec0:062e8936 spares=2 devices=/dev/cciss/c1d0,/dev/cciss/c0d1
server-b:/usr/src/packages# mdadm /dev/md0 --stop server-b:/usr/src/packages# mdadm -A /dev/md0 -f /dev/cciss/c1d0 /dev/cciss/c0d1 mdadm: failed to RUN_ARRAY /dev/md0: Invalid argument
Version 1.8.2 (source compiled):
server-b:/usr/src/packages# mdadm --create /dev/md0 --level multipath -n 2 /dev/cciss/c0d1 /dev/cciss/c1d0 mdadm: array /dev/md0 started.
server-b:~# cat /proc/mdstat
Personalities : [multipath]
read_ahead 1024 sectors
md0 : active multipath cciss/c1d0[0] cciss/c0d1[1]
0 blocks [1/1] [U]unused devices: <none>
mdadm --examine --scan --config=/etc/mdadm/mdadm.conf >> /etc/mdadm/mdadm.conf
server-b:/usr/src/packages# cat /etc/mdadm/mdadm.conf DEVICE /dev/cciss/c[0-9]d[0-9] ARRAY /dev/md0 level=multipath num-devices=1 UUID=afcb797f:f7cfa5f6:e0ed8819:59529278 devices=/dev/cciss/c1d0,/dev/cciss/c0d1
server-b:/usr/src/packages# mdadm /dev/md0 --stop server-b:/usr/src/packages/mdadm-1.8.1# mdadm -A /dev/md0 -f /dev/cciss/c1d0 /dev/cciss/c0d1 mdadm: /dev/md0 has been started with 1 drive and 1 spare.
Quoted 1 line · Oliver Heinz
Mixing mdadm-1.6 and 1.8.1 for creating/managing the device doesn't work, it gives me an segfault.
try patching mdadm-1.8.1 with this patch, it might help with the segfault.
Signature · 6 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \
mdadm.c renamed from mdadm.c.bluca +1 -2
@@ -80,11 +80,10 @@int mdfd =-1 ; - ident.uuid_set=0 ; +memset (&ident,0 ,sizeof (struct mddev_ident_s )); ident.level = UnSet; ident.raid_disks = UnSet; ident.super_minor= UnSet; - ident.devices=0 ; while ((option_index = -1) , (opt=getopt_long(argc, argv,
config.c renamed from config.c.bluca +1 -5
@@ -266,15 +266,11 @@struct mddev_ident_s mis;mddev_ident_t mi; - mis.uuid_set =0 ; +memset (&mis,0 ,sizeof (struct mddev_ident_s )); mis.super_minor = UnSet; mis.level = UnSet; mis.raid_disks = UnSet; mis.spare_disks = UnSet; - mis.devices =NULL ; - mis.devname =NULL ; - mis.spare_group =NULL ; - mis.autof =0 ;for (w=dl_next (line); w!=line; w=dl_next (w)) {if (w[0 ] =='/' ) {
Re: Multipath problem [zero Block multipath device creation with mdadm 1.8.1]
Quoted 7 lines · Luca Berra
Quoted 1 line · Oliver Heinz
Mixing mdadm-1.6 and 1.8.1 for creating/managing the device doesn't work, it gives me an segfault.
try patching mdadm-1.8.1 with this patch, it might help with the segfault.
This works! Thanks a lot!
Now creating the md-device with versions prior 1.8.1 works (I tested 1.60 and 1.8.0) - restarting the array with them fails. With 1.8.1 (with patch applied) I get an 0 Block device created bit I can restart the (correct) device I created with 1.60.
Now of course it would be great to get the device created and restarted with the same utility. We'd like to use it in production environment here, can more experienced mdadm users recommend that, these problems did not really strengthen our confidence in mdadm (at least when it comes to multipath, we have (of course) been using mdadm successfully for raid on severall systems).
Are the code changes in 1.8.1 so drastic that you would recommend to stick with prior versions and fix the issue with starting the array or would you suggest to get 1.8.1 to get MD creation in 1.8.1 fixed (well it need's to be fixed anyway ;-).
Bye,
Oliver
Quoted 30 lines
------------------------------------------------------------------------
mdadm.c renamed from mdadm.c.bluca +1
-2@@ -80,11 +80,10 @@int mdfd =-1 ; - ident.uuid_set=0 ; +memset (&ident,0 ,sizeof (struct mddev_ident_s )); ident.level = UnSet; ident.raid_disks = UnSet; ident.super_minor= UnSet; - ident.devices=0 ; while ((option_index = -1) , (opt=getopt_long(argc, argv,config.c renamed from config.c.bluca +1
-1@@ -266,15 +266,11 @@struct mddev_ident_s mis;mddev_ident_t mi; - mis.uuid_set =0 ; +memset (&mis,0 ,sizeof (struct mddev_ident_s )); mis.super_minor = UnSet;
config.c line 276
Quoted 10 lines
config.c renamed from config.c.bluca +0
-4mis.level = UnSet; mis.raid_disks = UnSet; mis.spare_disks = UnSet; - mis.devices =NULL ; - mis.devname =NULL ; - mis.spare_group =NULL ; - mis.autof =0 ;for (w=dl_next (line); w!=line; w=dl_next (w)) {if (w[0 ] =='/' ) {
.
Quoted 11 lines · On Tuesday November 23, [email protected] wrote:
Hi,
I'm trying to setup a HP packaged cluster (2xDL380G4 Servers +MA500G2 Storage) both Servers are connected via 2 SCSI-Links one for each of the storages's redundancy controllers.
The Storage shows as/dev/cciss/c0d1and/dev/cciss/c1d0. When I create an multipath md device with version 1.6 of mdadm I can create it but restarting the array after I stopped it fails. With version 1.8.2 the size of the generated Array is 0 Blocks but I can restart it (which buys me nothing with that size ;-)
Quoted 2 lines
Mixing mdadm-1.6 and 1.8.1 for creating/managing the device doesn't work, it gives me an segfault.
mdadm 1.8.0 is the version I would recommend. 1.8.1 is a development release.
Quoted 4 lines
server-b:/usr/src/packages# mdadm -A /dev/md0 -f /dev/cciss/c1d0 /dev/cciss/c0d1 mdadm: failed to RUN_ARRAY /dev/md0: Invalid argument
If this still happens with 1.8.0, could you see if there are any messages in the kernel log (e.g. output of 'dmesg'), and send them to me.
Thanks,
NeilBrown