c110: kernel 2.6.10-rc1-pa17 pb to boot if a cdrom is in the drive
Hello all,
I grab a support+ cdrom to test a scsi disk of model "SEAGATE ST34573W" with ode diskutil.
As it didn't detect any disk read error, I want to reboot linux kernel on my c110 but I forget to remove the cdrom from it's drive. And I got following pb when I reboot linux (kernel 2.6.10-rc1-pa10:
[...]
53c700: Version 2.8 By [email protected]
scsi1: 53c710 rev 2
scsi1 : LASI SCSI 53c700
Vendor: HP Model: DVD-ROM 6x/32x Rev: 1.08
Type: CD-ROM ANSI SCSI revision: 02
target1:0:0: Beginning Domain Validation
scsi1: (0:0) Asynchronous
scsi1: (0:0) Synchronous at offset 8, period 100ns
target1:0:0: Echo buffer size 5280 is too big, trimming to 4096
target1:0:0: Domain Validation detected failure, dropping back
scsi1: (0:0) Synchronous at offset 8, period 152ns
target1:0:0: Domain Validation detected failure, dropping back
scsi1: (0:0) Synchronous at offset 8, period 252ns
target1:0:0: Domain Validation detected failure, dropping back
scsi1: (0:0) Synchronous at offset 8, period 400ns
scsi1 (0:0) New error handler wants to abort command
scsi1 : destination target 0, lun 0
command = 0x03 00 00 00 60 00
scsi1 (0:0) New error handler wants device reset
scsi1 : destination target 0, lun 0
command = 0x03 00 00 00 60 00
scsi1 (0:0) New error handler wants BUS reset, cmd 2fd1ab60
scsi1 : destination target 0, lun 0
command = 0x03 00 00 00 60 00
scsi1: Bus Reset detected, executing command 2fd1ab60, slot 2fd70520, dsp 001d8528[0528]
failing command because of reset, slot 2fd70520, cmnd 2fd1ab60
scsi1 (0:0) broken device is looping in contingent allegiance: ignoring
scsi1 (0:0) New error handler wants to abort command
scsi1 : destination target 0, lun 0
command = 0x03 00 00 00 60 00
scsi1 (0:0) New error handler wants device reset
scsi1 : destination target 0, lun 0
command = 0x03 00 00 00 60 00
scsi1 (0:0) New error handler wants BUS reset, cmd 2fd1ab60
scsi1 : destination target 0, lun 0
command = 0x03 00 00 00 60 00
scsi1: Bus Reset detected, executing command 2fd1ab60, slot 2fd70520, dsp 001d8528[0528]
failing command because of reset, slot 2fd70520, cmnd 2fd1ab60
scsi1 (0:0) broken device is looping in contingent allegiance: ignoring
scsi1 (0:0) New error handler wants to abort command
scsi1 : destination target 0, lun 0
command = 0x03 00 00 00 60 00
scsi1 (0:0) New error handler wants device reset
scsi1 : destination target 0, lun 0
command = 0x03 00 00 00 60 00
scsi1 (0:0) New error handler wants BUS reset, cmd 2fd1ab60
scsi1 : destination target 0, lun 0
command = 0x03 00 00 00 60 00
scsi1: Bus Reset detected, executing command 2fd1ab60, slot 2fd70520, dsp 001d8528[0528]
failing command because of reset, slot 2fd70520, cmnd 2fd1ab60
scsi1 (0:0) broken device is looping in contingent allegiance: ignoring
scsi1 (0:0) broken device is looping in contingent allegiance: ignoring
target1:0:0: Domain Validation detected failure, dropping back
scsi1: (0:0) Synchronous at offset 0, period 0ns
target1:0:0: Domain Validation detected failure, dropping back
scsi1: (0:0) Asynchronous
target1:0:0: Domain Validation Failure, dropping back to Asynchronous
target1:0:0: Ending Domain Validation
Vendor: SEAGATE Model: ST34573W Rev: HP11
Type: Direct-Access ANSI SCSI revision: 02
target1:0:3: Beginning Domain Validation
until I remove the cdrom then it continue the boot:
scsi1: (3:0) Asynchronous
scsi1: (3:0) Enabling Tag Command Queuing
scsi1: (3:0) Synchronous at offset 8, period 100ns
target1:0:3: Domain Validation skipping write tests target1:0:3: Ending Domain Validation
...
Any idea?
Thanks in advance,
Joel
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux