Skip to contentSkip to conversation

Current PID in static kernel memory

DISCUSSION Robin Gilks 1 participant 1 message Dec 3, 2004

lore
Share & tools
lore
#0 lore raw

Greetings

On a 2.4.22 kernel running on an 8xx CPU, I'm trying to find useful static kernel memory locations that will help diagnose problems after a crash has occured.

So far I have identified load averages, uptime, active & inactive memory and interrupt counts and I can dump these out from the bootloader.

What I'd really like is the pid of the current task but I can't find it as the current task structure pointer is held in a register (r2) and hence is not available after a reset.

Any clues as to where I could find this information?

Signature · 17 lines
Robin Gilks
Senior Design Engineer          Phone: (+64)(3) 357 1569
Tait Electronics                Fax  :  (+64)(3) 359 4632
PO Box 1645 Christchurch        Email : [email protected]
New Zealand

=======================================================================
This email, including any attachments, is only for the intended
addressee.  It is subject to copyright, is confidential and may be
the subject of legal or other privilege, none of which is waived or
lost by reason of this transmission.
If the receiver is not the intended addressee, please accept our
apologies, notify us by return, delete all copies and perform no
other act on the email.
Unfortunately, we cannot warrant that the email has not been
altered or corrupted during transmission.
=======================================================================