bytestore Flash Drive 512MB does not work with fc3.
Hello,
My USB bytestore 512MB does function correctly with FC1 but it has problems wit FC3 as you can see in the message file.
Kind Regards,
Rob Versluis
Dec 4 07:31:53 jupiter kernel: sda: test WP failed, assume Write Enabled Dec 4 07:31:53 jupiter kernel: sda: assuming drive cache: write through Dec 4 07:31:57 jupiter ntpd[2090]: synchronized to LOCAL(0), stratum 10 Dec 4 07:31:57 jupiter ntpd[2090]: kernel time sync disabled 0041 Dec 4 07:31:57 jupiter pam_timestamp_check: pam_timestamp: `/' owner UID != 0 Dec 4 07:31:58 jupiter wait_for_sysfs[3530]: either wait_for_sysfs
(udev 039) needs an update to handle the device '/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0' properly (no bus device link) or the sysfs-support of your device's driver needs to be fixed, please report to <[email protected]>
Dec 4 07:31:58 jupiter wait_for_sysfs[3539]: either wait_for_sysfs
(udev 039) needs an update to handle the device '/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/host1/1:0:0:0' properly (no bus device link) or the sysfs-support of your device's driver needs to be fixed, please report to <[email protected]>
Dec 4 07:31:58 jupiter wait_for_sysfs[3543]: either wait_for_sysfs (udev 039) needs an update to handle the device '/block/sda' properly (no bus device link) or the sysfs-support of your device's driver needs to be fixed, please report to <[email protected]> Dec 4 07:32:02 jupiter pam_timestamp_check: pam_timestamp: `/' owner UID != 0 Dec 4 07:32:07 jupiter pam_timestamp_check: pam_timestamp: `/' owner UID != 0 Dec 4 07:32:08 jupiter hal.hotplug[3545]: timout(10000 ms) waiting for /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0 Dec 4 07:32:08 jupiter hal.hotplug[3549]: timout(10000 ms) waiting for
/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/host1/1:0:0:0
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Quoted 10 lines · Rob Versluis
Hello,
My USB bytestore 512MB does function correctly with FC1 but it has problems wit FC3 as you can see in the message file.
Dec 4 07:31:58 jupiter wait_for_sysfs[3530]: either wait_for_sysfs(udev 039) needs an update to handle the device '/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0' properly (no bus device link) or the sysfs-support of your device's driver needs to be fixed, please report to <[email protected]>
We got several reports like that. Seems like something is wrong with usb-storage device removal (only the first connect is successful). Some people reported, that "eject /dev/sda" before unplugging prevented the error.
I've had the same problem here but it's gone with kernel 2.6.10*, so I never looked into the reason for it. :)
Thanks,
Kay
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel