Skip to contentSkip to conversation

dma errors with sata_sil and Seagate disk

DISCUSSION [email protected] 1 participant 1 message Dec 25, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

I was wondering whether you know how this bug is dealt with in the siI Windows drivers. Are they also using some fix that limits the performance? I remember my friend pulling a file via a cross-over cable (ie: no switch) with some 26megs/s, so I guess not? Would you be so kind to explain this to me? :)

I'm running 2.6.10-rc3 with the blacklisted ST3120026A on the SiI 3512A controller. When I try 'hdparm -t /dev/sda', I get this:

raz0:/home/morten# hdparm -t /dev/sda

/dev/sda:
Timing buffered disk reads: 46 MB in 3.08 seconds = 14.94 MB/sec
HDIO_DRIVE_CMD(null) (wait for flush complete) failed: Inappropriate ioctl for device

Is this the same bug? I haven't noticed any problems other than the hdparm one.

Please CC me if you reply; I am not on the list.

Morten

Quoted 15 lines
Quoted 2 lines

I've never been able to get a non NDA list of the affected drives. Got to love vendors some days

I seriously doubt a complete list exists, NDA or no. You'd have to poll

each vendor.

I also suspect that a few of the more recent Seagate additions are simply masking a problem in the BIOS.

SiI 311x problems have a history of resolving themselves through BIOS updates and tweaks. Most recently a lockup was solved by tweaking a 'byte enable' setting in an nForce mobo BIOS.

Jeff