Skip to contentSkip to conversation

What is wrong here?

LARTC gypsy 1 participant 1 message Dec 21, 2004

lore
Share & tools
lore

gypsy

author
#0 lore raw
Quoted 8 lines · George Alexandru Dragoi

Hello Everyone,

I have this weird problem. I have 2.6.10-rc2-mm3 kernel with u32 compiled as module. I have the cls_u32 module loaded. I have different binaryes of tc, the one from iproute packaged from debian sarge, the Kaber's one from trash.net, and also from another computer where u32 worked. When I run this:

Quoted 4 lines
cyclops:~# /usr/local/sbin/tc filter add dev eth0 parent 6: protocol
ip prio 4 u32  match ip src 1.1.1.1/32 classid 6:a000
 I get
RTNETLINK answers: Invalid argument

No, it is not a weird problem <g>. I run it and get the same result.

The probability is that there is no "parent 6:" or that there is no flowid/classid "6:a000". It is also possible there is no eth0, meaning your qdisc is on eth1. I guess it could also be that 1.1.1.1/32 is not a valid IP for that interface?

gypsy
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/