RAID1 Software and SII3114 trouble
Hi,
I install a debian with kernel 2.6.9 and two HD using raid 1 software.
All partition are under raid software.
I getting trouble when i reboot the linux with error of read/write :
ata4: command 0x35 timeout, stat 0xd8 host_stat 0x1
ata4: status=0xd8 { Busy }
SCSI error : <4 0 0 0> return code = 0x8000002
Current sdb: sense 70 10
Raw sens data :0x70 0x00 0x10 0X00 0X00 0X00 0X00 0X0a 0X00 0X00 0X00 0X00 0X00 0X00 0X00 0X00 0X00 0X00end_request: I/O error, dev sdb, sector 226864909
ATA: abnormal status 0xD8 on port 0XF88022C7
ATA: abnormal status 0xD8 on port 0XF88022C7
ATA: abnormal status 0xD8 on port 0XF88022C7
The server will not freeze, but no disk access can be made.
I scan sdb with mkfs to search bad sector but find nothing. I dont get
any message when i am under degraded array and i think that if a HD have some problem, dmadm will put it under fault.
My configuration is a Tyan i7210 with SII3114 SATA RAID Chipset and the
two HD are both Seage SATA 120Go.
Thx in advance for support,
Regards,
RAID1 Software and SII3114 trouble (second part)
Hi again,
I forgot to say that i install my debian with the last knoppix CD ROM and i got no problem when i chroot /dev/md1 to install the base file, compile kernel, etc etc
Quoted 34 lines · Froggy / Froggy Corp.
Hi,
I install a debian with kernel 2.6.9 and two HD using raid 1 software.
All partition are under raid software.
I getting trouble when i reboot the linux with error of read/write :ata4: command
0x35timeout, stat0xd8host_stat0x1
ata4: status=0xd8 { Busy }
SCSI error : ?4 0 0 0? return code =0x8000002
Current sdb: sense 70 10
Raw sens data :0x700x000x100X000X000X000X000X0a0X000X000X000X000X000X000X000X000X000X00end_request: I/O error, dev sdb, sector 226864909
ATA: abnormal status0xD8on port0XF88022C7
ATA: abnormal status0xD8on port0XF88022C7
ATA: abnormal status0xD8on port0XF88022C7The server will not freeze, but no disk access can be made.
I scan sdb with mkfs to search bad sector but find nothing. I dont get
any message when i am under degraded array and i think that if a HD have some problem, dmadm will put it under fault.My configuration is a Tyan i7210 with SII3114 SATA RAID Chipset and the
two HD are both Seage SATA 120Go.Thx in advance for support,
Regards,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/