Recognition for ECS K7VTA3 integrated VIA 8233A in via82xx.c
This is a fast little patch to add automatic recognition of some (older?) model of VIA8233A integrated audio that have to be configured with dxs_support = 4 (NO_VRA).
With dxs_support set to 1 (ENABLE) or 3 (48K, default without that) the audio works but it's REALLY REALLY REALLY poor.
I see that ECS K7VTA3 support is already there, but mine shows a different vendor/device codes. I tried to find out what revision my board is, and i THINK it's a 6.0a, I'm not sure (it's not clear on both manual and board itself, at least to me). I tried that patch with a friend's board (same version, we bought them togheter) and it works. I hope to hear from someone else that have the same version I have.
sound/pci/via82xx.c +0 -0
@@ -2094,6 +2094,7 @@
{ .vendor = 0x1005, .device = 0x4710, .action = VIA_DXS_ENABLE }, /* Avance Logic Mobo */
{ .vendor = 0x1019, .device = 0x0996, .action = VIA_DXS_48K },
{ .vendor = 0x1019, .device = 0x0a81, .action = VIA_DXS_NO_VRA }, /* ECS K7VTA3 v8.0 */
+ { .vendor = 0x1019, .device = 0x1841, .action = VIA_DXS_NO_VRA }, /* ECS K7VTA3 (maybe v6.0a) */
{ .vendor = 0x1019, .device = 0x0a85, .action = VIA_DXS_NO_VRA }, /* ECS L7VMM2 */
{ .vendor = 0x1025, .device = 0x0033, .action = VIA_DXS_NO_VRA }, /* Acer Inspire 1353LM */
{ .vendor = 0x1043, .device = 0x8095, .action = VIA_DXS_NO_VRA }, /* ASUS A7V8X (FIXME: possibly VIA_DXS_ENABLE?)*/I also applied the following patch to identify vendor/device codes.
BTW, i would like to have some explainations here. I can accept an answer like "Go Learn By Yourself" :-)
I wrote this patch using an approach that needs not so much knowledge of hardware, I just looked in the code and understood more or less how it works. I guess the two codes that come out from :
pci_read_config_word(pci, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vendor);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &subsystem_device);*should* be the vendor id and the device id, as usual. BUT these are not, as shown in /proc/pci:
[...]
Bus 0, device 17, function 5:
Class 0401: PCI device 1106:3059 (rev 80).
IRQ 5.
I/O at 0xe400 [0xe4ff].[...]
and in fact the following patch (that i used to find the two values) shown something else.
I know that probably I am wrong, and probably these pairs are simply different things. Can someone can enlighten me or point me somewhere to read anything?
Noobish thanks =)
sound/pci/via82xx.c +0 -0
@@ -2146,6 +2147,7 @@
printk(KERN_INFO "via82xx: Assuming DXS channels with 48k fixed sample rate.\n"); printk(KERN_INFO " Please try dxs_support=1 or dxs_support=4 option\n"); printk(KERN_INFO " and report if it works on your machine.\n"); + printk(KERN_INFO " (vendor = 0x%x , device = 0x%x).\n", subsystem_vendor, subsystem_device); return VIA_DXS_48K; };
BTW2: the [PATCH] tag have to/should/could be used when submitting patches like that?