0000773: Kernel 2.6.10 with ALSA 1.08rc1 from CVS (12/30/2004) Audigy2 Value - SB0400 card Audigy2 Value- AUX-In and LINE-IN no sound
Just a quick note on the audigy2 value problem reported in 773, "auxin and linein prevent tvtime and cd player from working".
On Debian amd64 (pure64) sid, running 2.6.9-ac6 and Alsa CVS from 19 December 2004, this is working -- that is to say, tvtime and other tv apps work, xmms works, even networked sound works fine using alsaplayer-nas. But the mixer settings are tricky.
I get sound from a TV card by plugging a short cable from the sound-out on the TV card to the line-in on the audigy2 value card.
Alsamixergui need these components on and up for television and normal playback:
* Master
* PCM (for soundcard playback -- not used by TV)
* Line (the first of the three Line components)
* Analog Mix (the first of two for playback)
* Analog Mix (the second of two for recording from TV)
* Audigy Analog Output Jack (unmute)
* EMU10K1 PCM (both, for playback)
* Front
IEC958 Optical Raw must be off (muted).
To turn on the recording channel, you can also use
amixer -c 0 cset numid=18 100%,100% unmute cap)
I saved (alsactl store) and occasionally the card muted, when switching between recording and watching, or between different tv apps (xdtv, motv, xawtv); alsactl restore fixed it.
It would be very useful if the mixer could by default be set with plausible values for a particular card; it took me a long time by nearly pure trial and error to find the channels I needed -- this is not very intuitive and sometimes downright peculiar.
Cheers,
Dave
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt