raid5 resync 2.6.10 freez
Hello,
i recently upgraded to a 4-IDE-RAID5. Since than the array is not able to resync itself.
linux 2.6.10 with software-raid
mdadm - v1.5.0 - 22 Jan 2004
4 X IDE DISK WDC WD1600JB-00FUA0 (160 GB)
2 X HPT374 (rev 07) IDE Conroller
Epox 8K5-A3+
Duron 1500 MHz CPU
After 5 to 10 minutes the os freez. The system console does not show anything.
#
# Kernel hacking
#CONFIG_DEBUG_KERNEL=yCONFIG_MAGIC_SYSRQ=yCONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not setCONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not setCONFIG_FRAME_POINTER=yCONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_4KSTACKS is not setCONFIG_X86_FIND_SMP_CONFIG=yCONFIG_X86_MPPARSE=y
I tried some 20 Kernels with no success.
Regardless of the resync speed the system freezes
sooner ar later.
10000 Kb/s after some 10 minutes.
1000 Kb/s after 1 to 2 hours.
There is no filesystem involved. The degraded arry without resyncing works fine.
How do i fugure out whats going on.
Thanks, Axel
Quoted 12 lines · Axel Christiansen
Hello,
i recently upgraded to a 4-IDE-RAID5. Since than the array is not able to resync itself.
linux 2.6.10 with software-raid
mdadm - v1.5.0 - 22 Jan 2004
4 X IDE DISK WDC WD1600JB-00FUA0 (160 GB)
2 X HPT374 (rev 07) IDE Conroller
Epox 8K5-A3+
Duron 1500 MHz CPU
Quoted 2 lines
After 5 to 10 minutes the os freez. The system console does not show anything.
With the ide/scsi driver from highpont v2.12 the array is doing a full resync. Sadly the module does not compile with Linux 2.6.10
Greets, Axel