Skip to contentSkip to conversation

Suse 9.1 port forwarding woes

DISCUSSION Nathan March 2 participants 2 messages Jan 10, 2005

lore
Share & tools
lore
#0 lore raw

Despite my best attempts, I cannot seem to get port forwarding working on a suse 9.1 machine using iptables.

My firewall.sh:

#!/bin/bash

IPTABLES='/usr/sbin/iptables'

EXTIF='eth0'
INTIF1='eth1'
INTIF2='eth2'

/bin/echo 1 > /proc/sys/net/ipv4/ip_forward

$IPTABLES -F
$IPTABLES -t nat -F
$IPTABLES -X

$IPTABLES -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE

$IPTABLES -A FORWARD -m state --state ESTABLISHED -j ACCEPT $IPTABLES -A FORWARD -p icmp -m state --state RELATED -j ACCEPT

$IPTABLES -A FORWARD -i $INTIF1 -o $EXTIF -m state --state NEW,ESTABLISHED -j ACCEPT $IPTABLES -A FORWARD -i $INTIF2 -o $EXTIF -m state --state NEW,ESTABLISHED -j ACCEPT

$IPTABLES -A INPUT --protocol tcp --dport 22 -j ACCEPT $IPTABLES -A INPUT --protocol tcp --dport 25 -j ACCEPT $IPTABLES -A INPUT --protocol tcp --dport 143 -j ACCEPT

$IPTABLES -A FORWARD -i eth0 -d 192.168.0.3 --protocol tcp --dport 80 -j ACCEPT $IPTABLES -A PREROUTING -i eth0 -t nat -p tcp --dport 80 -j DNAT --to 192.168.0.3:80

After the script runs:
linux:~ # iptables --list
Chain INPUT (policy ACCEPT)

target     prot opt source               destination        ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:ssh
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:smtp
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:imap

Chain FORWARD (policy ACCEPT)

target     prot opt source               destination        ACCEPT     all  --  anywhere             anywhere            state ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            state RELATED
ACCEPT     all  --  anywhere             anywhere            state NEW,ESTABLISHED
ACCEPT     all  --  anywhere             anywhere            state NEW,ESTABLISHED
ACCEPT     tcp  --  anywhere             192.168.0.3         tcp dpt:http flags:FIN,SYN,RST,ACK/SYN state NEW

Chain OUTPUT (policy ACCEPT)
target prot opt source destination linux:~ # iptables -t nat --list
Chain PREROUTING (policy ACCEPT)
target prot opt source destination DNAT tcp -- anywhere anywhere tcp dpt:http to:192.168.0.3

Chain POSTROUTING (policy ACCEPT)
target prot opt source destination MASQUERADE all -- anywhere anywhere

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

Anyone have any ideas what I'm doing wrong?

Thanks,
Nathan

#1 lore raw
Quoted 68 lines · Nathan March

Despite my best attempts, I cannot seem to get port forwarding working on a suse 9.1 machine using iptables.

My firewall.sh:

#!/bin/bash

IPTABLES='/usr/sbin/iptables'

EXTIF='eth0'
INTIF1='eth1'
INTIF2='eth2'

/bin/echo 1 > /proc/sys/net/ipv4/ip_forward

$IPTABLES -F
$IPTABLES -t nat -F
$IPTABLES -X

$IPTABLES -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE

$IPTABLES -A FORWARD -m state --state ESTABLISHED -j ACCEPT $IPTABLES -A FORWARD -p icmp -m state --state RELATED -j ACCEPT

$IPTABLES -A FORWARD -i $INTIF1 -o $EXTIF -m state --state NEW,ESTABLISHED -j ACCEPT
$IPTABLES -A FORWARD -i $INTIF2 -o $EXTIF -m state --state NEW,ESTABLISHED -j ACCEPT

$IPTABLES -A INPUT --protocol tcp --dport 22 -j ACCEPT $IPTABLES -A INPUT --protocol tcp --dport 25 -j ACCEPT $IPTABLES -A INPUT --protocol tcp --dport 143 -j ACCEPT

$IPTABLES -A FORWARD -i eth0 -d 192.168.0.3 --protocol tcp --dport 80 -j ACCEPT
$IPTABLES -A PREROUTING -i eth0 -t nat -p tcp --dport 80 -j DNAT --to 192.168.0.3:80

After the script runs:
linux:~ # iptables --list
Chain INPUT (policy ACCEPT)

target     prot opt source               destination        
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:ssh
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:smtp
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:imap

Chain FORWARD (policy ACCEPT)

target     prot opt source               destination        
ACCEPT     all  --  anywhere             anywhere            state 
ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            state RELATED
ACCEPT     all  --  anywhere             anywhere            state 

NEW,ESTABLISHED
ACCEPT all -- anywhere anywhere state
NEW,ESTABLISHED
ACCEPT tcp -- anywhere 192.168.0.3 tcp
dpt:http flags:FIN,SYN,RST,ACK/SYN state NEW

Chain OUTPUT (policy ACCEPT)
target prot opt source destination
linux:~ # iptables -t nat --list
Chain PREROUTING (policy ACCEPT)

target     prot opt source               destination        
DNAT       tcp  --  anywhere             anywhere            tcp 

dpt:http to:192.168.0.3

Quoted 8 lines

Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
MASQUERADE all -- anywhere anywhere

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

Anyone have any ideas what I'm doing wrong?

i can tell you that the output of "iptables --list" you provide here does not reflect the script above. which might be the root of your problem.

-j

--
"The lesson is: Our God is vengeful! O spiteful one, show me who to
smite and they shall be smoten!!!"
--The Simpsons