Skip to contentSkip to conversation

Problem about PCM device on iMX21 board

DISCUSSION sudong 2 participants 2 messages Jan 12, 2005

lore
Share & tools
lore

sudong

author
#0 lore raw

Hi,everyone:
I write an auido driver for iMX21 board based on ALSA. I have loaded the driver module and created the node in /dev/snd. But when I used aplay to play audio file , such as "aplay -D "hw:0,0" 1.wav", it said "Unknown the PCM hw:0,0".
Why ?? How can I resolve the problem?

Thanks!

argo

#1 lore raw
Quoted 4 lines · sudong

I write an auido driver for iMX21 board based on ALSA. I have loaded the driver module and created the node in /dev/snd. But when I used aplay to play audio file , such as "aplay -D "hw:0,0" 1.wav", it said "Unknown the PCM hw:0,0".

Does the PCM device appear in /proc/asound/devices?

What is the exact error message?

Clemens

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt